Home » MODDING HQ 1.13 » v1.13 Modding, Customising, Editing » v1.13 Modding, Customising, Editing » Sandbags and Concentinas Tileset Expansion
|
Re: Sandbags and Concentinas Tileset Expansion[message #360115 is a reply to message #359438]
|
Thu, 21 May 2020 23:23
|
|
Kitty |
|
Messages:473
Registered:October 2017 Location: Germany |
|
|
Vritran wrote on Tue, 07 April 2020 12:00
This appears to be a free slot in most tilesets. I note there are a few tilesets where I have had to squeeze them in wherever although they should all be in "2 Place Barrels & Other Junk" in the editor.
Regarding the "free slot", I wouldn't phrase it like that. The Default-Tileset is Generic 1 (Tileset 0). This Nr 0 contains entries for all 151 slots. If you look into another tileset, you'll see that most of those haven't entries for all slots. Those slots not having an entry, then use the entry from the default tileset (Generic 1, 0).
For example look at tileset 10 (Generic 2 (Dirtroads)). This one has no entries at 103-106. Looking at Generic 1 (0), there are entries for "drum_01" and its shadow filled in at 103-106 (it's there two times). When you look at maps that use Tileset 10, you sure will see some that use content from drum_01.
In Map-Editor, when doing a mouse-over on the graphics, at the top of the map-editor you'll see something like "fom Default Tileset Generic 1" when this is the case.
So, those slots ain't empty, they origin from default tileset unless the tileset in use has changed this.
And if you replace both versions of drum_01 in a tileset this also means, you won't see content of drum_01 when using this tileset on map. Which probably will mess a few maps, most tilesets are used for more then one map in standard 1.13 and also in AR. Replacing one drum_01 is fine, but then you also have to check the maps on wether those used 103/105 or 104/106 version of drum_01. This can differ from map to map, based on how the maps originally where created. Use one of the drum_01 for sandbags and look for another place to fill in concertina.
Because you can replace stuff with sandbags also in other places. Like "trees" or "rocks" and even "roofs". When you e.g. replace the "roofvents" in roofs with sandbags, you'll get sandbags on the roof (shadows are tricky then and you may have to create a bit of roof). You have to experiement a little, not all places can be used (some don't allow more then a certain amount of pictures used in sti). Whatever you replace, you should check the effect on all maps using the changed tileset. Having a save backup-copy of the maps, tilesets, ja2set.dat and ja2set.dat.xml is advised.
[Updated on: Thu, 21 May 2020 23:29]
How to get: latest 1.13, 7609 and more | 7609 SCI (eng) | Compiling+SVN
I need more details. (Didi Hallervorden) Report message to a moderator
|
|
|
|
|
|
Re: Sandbags and Concentinas Tileset Expansion[message #361855 is a reply to message #360145]
|
Sun, 15 November 2020 20:33
|
|
Kitty |
|
Messages:473
Registered:October 2017 Location: Germany |
|
|
Since I'm refered to for the description, I'd like to add a little.
Might be phrased unclear above (by me), but it is of course also possible to change Tileset 0 (Generic 1, default Tileset).
Due to the nature of being the default Tileset, changes can effect other Tilesets and therefore more maps.
If this is taken in account, it should be no problem to change Tileset 0 for fortifications as well.
Depending on how it's approached, using Tilest 0 can even be benificial for this purpose. If changing, as an example, drum_01 in Tileset 0, this will effect any other Tilests that take drum_01 from the default tileset - and therefore will effect all maps with those tilesets at once. So, it's more work to check the maps, but less work for changing Tilesets.
In short, if anybody wants to change Tileset 0, it can be done as well.
How to get: latest 1.13, 7609 and more | 7609 SCI (eng) | Compiling+SVN
I need more details. (Didi Hallervorden) Report message to a moderator
|
|
|
|
|
|
Goto Forum:
Current Time: Thu Nov 28 22:51:40 GMT+2 2024
Total time taken to generate the page: 0.01531 seconds
|