Home » PLAYER'S HQ 1.13 » JA2 Complete Mods & Sequels » UC/DL 1.13 & AFS » UC-1.13 Discussions and Bug Reporting (2013/03/07 to 201-/--/--)
Re: UC-1.13 Discussions and Bug Reporting (2013/03/07 to 201-/--/--)[message #349166 is a reply to message #349128] Sun, 05 March 2017 14:51 Go to previous messageGo to next message
yghl
Messages:3
Registered:March 2017
yghl@gmx.net wrote on Fri, 03 March 2017 21:39
Tango wrote on Mon, 06 February 2017 00:05
Is anyone else having an unhandled exception error when trying to load the Atremo airport sector with the latest test release?

Shows sector load screen fine, you hear the initial Atremo airport sounds (announcement and carousel noise etc.) but screen goes black and eventually gives an unhandled exception popup.

Using R3866 with the latest test release.

Edit: Fixed by getting a new copy of the original UC files, my copy had some corruptions.

I have the same problem, although mine is not fixed by updating the UC files.
Fresh install of JA2, Exe8366/GameDir2357, UC 4.60 v20170116

Anyone has an idea what i could do?


Ok, this error occurs only when i set the resolution mode higher than 10 in the ja2.ini
Re: UC-1.13 Discussions and Bug Reporting (2013/03/07 to 201-/--/--)[message #349595 is a reply to message #349166] Sat, 22 April 2017 06:10 Go to previous messageGo to next message
Cerhio

 
Messages:77
Registered:March 2013
Is there any way to get a copy of the old version? I'm running into a bug where you have to click the adjacent tile to interact with doors or crates. It's extremely annoying.

EDIT: Fixed the issue. It was occurring due to my 1920x1080 resolution. I've also found that starting a new game is not possible with that resolution but you can start with a different one and then change it mid-way.

[Updated on: Fri, 05 May 2017 21:52]

Re: UC-1.13 Discussions and Bug Reporting (2013/03/07 to 201-/--/--)[message #349723 is a reply to message #349595] Fri, 05 May 2017 21:55 Go to previous messageGo to next message
Cerhio

 
Messages:77
Registered:March 2013
Hey guys, just wanted to say that the latest experimental seems to be running pretty damn smooth! I do run into occasional crashes without any error message but those are easy to get around just by reloading the last save.

I found that the recipe to create flamethrower fuel does not work. I've tried every combination of Gas + Gum + Herbicide and it doesn't work.
Re: UC-1.13 Discussions and Bug Reporting (2013/03/07 to 201-/--/--)[message #349747 is a reply to message #349723] Sun, 07 May 2017 21:23 Go to previous messageGo to next message
Wil473

 
Messages:2815
Registered:September 2004
Location: Canada
Getting back to work on the mod...

Wil473 wrote on Mon, 16 January 2017 20:42
Double Posting here too, for more or less the same reason as the last time I did this today:

Urban Chaos-1.13 Full Experimental 7 v4.6x 20170116

Major points:
* Consolidated Change Log, AFS and UC113 v4.60 change log 20170116.PDF
* new <usVoiceIndex> added to MercProfiles.XML from yesterday's SCI_Unstable_Revision_8366_on_GameDir_2357 to stop everyone from sounding like Barry (ID 0)


Above Experimental 7 seems to work alright on current SCI: SCI_Unstable_Revision_8403_on_GameDir_2363



Cerhio wrote on Fri, 05 May 2017 13:55
Hey guys, just wanted to say that the latest experimental seems to be running pretty damn smooth! I do run into occasional crashes without any error message but those are easy to get around just by reloading the last save.

I found that the recipe to create flamethrower fuel does not work. I've tried every combination of Gas + Gum + Herbicide and it doesn't work.


Tested the recipe using what should be very close to the old/current Urban Chaos-1.13 Full Experimental 7 v4.6x 20170116, worked for me.
Toggle Spoiler



More weapon features and upgrade options, via (mis)use of v1.13 for vanilla Arulco, Dedrianna Lives! and Urban Chaos campaigns.


Re: UC-1.13 Discussions and Bug Reporting (2013/03/07 to 201-/--/--)[message #349947 is a reply to message #349747] Fri, 02 June 2017 19:53 Go to previous messageGo to next message
Huberclim

 
Messages:34
Registered:May 2011
Location: Germany
Hi everyone,

my goal is to play Urban Chaos with v1.13 and Win10 64bit as stable as possible. I tried following this guide (great written btw.): http://thepit.ja-galaxy-forum.com/index.php?t=msg&th=18716 but I struggle and it doesn't work for me. Could you please help me?

Just one question before: As I would like to play a version which is most stable as it could be: Is it a good idea to use for v1.13 the Build 7609 from 25 Oct 2014 or is this so old, that it doesn't matter if I take this one or the latest SCI for v1.13?

What I did so far:

1. Installed JA2 from gog.com in a modfriendly folder (Do I need Unfinished Business?)
2. Installed stable v1.13 (Build 7609)
3. Inserted the 3 DLLs from Wined3D-DLL for smooth running under Win10 (Do I really need this? It's the only way that could got it work with Win10.)
4. Downloaded UC from here: https://www.fileplanet.com/135355/130000/fileinfo/Jagged-Alliance-2:-Urban-Chaos
5. When I unzip "ja2ucus.zip" there's a folder created which contains UC_SETUP.exe and 18 still zipped folders (UC_ENG_001.zip, etc.). Is this correct?
6. Then I struggled with the following step:

Quote:

1. Create an easy to find folder named "UC Target"
2. Copy the ja2.exe file from the 1.13 install into the "UC Target" folder.
3. Launch the original Urban Chaos installer, and direct it to ja2.exe in the folder named "UCTarget" and run. This will unpack all the original Urban Chaos files.
4. Inside UC Target folder, find folder "DATA" and rename to "DATA-UC"


Steps 1+2 are fine. But step 3: Here, when I run the "original Urban Chaos installer", is there "UC_SETUP.exe" meant? If I run this, it crashes with "Error!" and the text "Memory access violation".

What did I do wrong?

Thanks for help,
H
Re: UC-1.13 Discussions and Bug Reporting (2013/03/07 to 201-/--/--)[message #349949 is a reply to message #349947] Sat, 03 June 2017 05:32 Go to previous messageGo to next message
Wil473

 
Messages:2815
Registered:September 2004
Location: Canada
The current Windows 10 does not seem to like the Original UC installer - it didn't crash on me but it progressively slowed down and eventually I gave up on it and ended the task. The installer worked in the past so I'm going to try this on a different Windows 10 machine (my low power Pentium n3700 has surprised me in other tasks that it seem quicker at than my I5-4690K based gaming machine so maybe it will be faster despite every spec indicating it is much much slower).

For now, the Original Urban Chaos mod can be unpacked manually via the "Alternate Installation" instructions in UC_README.TXT to extract the original Urban Chaos Data folder (which you will rename to Data-UC and then copy to your v1.13 install). Advice: 1) copy the EXE folders the batch file (.bat) creates to an empty folder as you don't want to replace your v1.13 data folder with this 17 year old folder), and 2) hit All to overwrite. It's tedious but still faster than trying the old installer. All of this was done from a fresh download from http://kermi.pp.fi/JA_2/Mods_Vanilla/Urban_Chaos/ all you need is the JA2UC.zip the patches are already in UC-1.13.



More weapon features and upgrade options, via (mis)use of v1.13 for vanilla Arulco, Dedrianna Lives! and Urban Chaos campaigns.


Re: UC-1.13 Discussions and Bug Reporting (2013/03/07 to 201-/--/--)[message #349983 is a reply to message #349949] Tue, 06 June 2017 19:07 Go to previous messageGo to next message
Huberclim

 
Messages:34
Registered:May 2011
Location: Germany
Thanks Wil, but it still doesn't work and is highly confusing for me. Is there anyone willing to upload a finished, prepared and working file package of UC so we just need to copy it to our v1.13 installation? That would be much easier.

Nevertheless, I tried it:
a) I downloaded UC from the Kermi page like you described.
b) I extracted the ZIP file, where a lot of other ZIP files are included, besides "README.txt" and "UC_SETUP.exe".
c) I executed UC_SETUP.exe in the same folder without moving anything (was that wrong?) and it crashed like described before with "Memory access violation", but it also generated a lot new files within the folder. There was also the batch file created, named "UC_ALT".
d) I executed UC_ALT within the same folder without moving it elsewhere. The batch process changed all ZIP files to EXE files.
e) I then tediously executed each EXE file (of course not the UrbanChaos.exe or UC_SETUP.exe which are also in the folder, was that wrong?) and hit "overwrite all" with all of them.

What shall I do now with these files? In the original guide there was a folder "Data-Graphics" described, but there is none such.

Regarding your advice for "1) copy the EXE folders the batch file (.bat) creates to an empty folder as you don't want to replace your v1.13 data folder with this 17 year old folder" --> I don't understand this advice because I didn't copied the content yet to my v1.13 folder?

Please let me know what I did wrong this time, at which step? :)

Thanks,
H

EDIT: Sorry, I didn't want to sound unfriendly. I am happy to get any help to finally I can play this mod with v1.13. I'm just a little frustrated and I now look forward for any help I get to get this run :)

[Updated on: Tue, 06 June 2017 19:26]

Re: UC-1.13 Discussions and Bug Reporting (2013/03/07 to 201-/--/--)[message #349984 is a reply to message #349983] Tue, 06 June 2017 21:06 Go to previous messageGo to next message
sevenfm

 
Messages:1278
Registered:December 2012
Location: South Urals
@Huberclim if you just need Data-UC with old UC data you can get it here https://yadi.sk/d/Fj_B0WEKNjRQJ/Mods
File is named Data-UC.7z, just unpack it, it was tested with UC-1.13 installation for 7609 and works fine.

[Updated on: Tue, 06 June 2017 21:21]




Stable 7609+fix (21.05.2017)
Stable 7609+AI (r473 21.08.2017)
Improved weapon sounds
Youtube channel


Re: UC-1.13 Discussions and Bug Reporting (2013/03/07 to 201-/--/--)[message #349985 is a reply to message #316064] Tue, 06 June 2017 23:48 Go to previous messageGo to next message
Huberclim

 
Messages:34
Registered:May 2011
Location: Germany
Thank you, sevenfm.
What do you mean with "old UC data" - is there any newer one? So I get the same like with the procedure described by Wil, correct?
So I have my JA2+v1.13 folder and I just copy the data from the downloaded folder inside it and overwrite everything and then start the mod via the INI Editor, correct?

EDIT: I'm still clueless, what do I do with the extracted Data-UC? I just copied it to the the JA2+v1.13 folder, but which files are missing?

[Updated on: Wed, 07 June 2017 00:44]

Re: UC-1.13 Discussions and Bug Reporting (2013/03/07 to 201-/--/--)[message #349987 is a reply to message #349985] Wed, 07 June 2017 07:56 Go to previous messageGo to next message
sevenfm

 
Messages:1278
Registered:December 2012
Location: South Urals
Huberclim wrote on Wed, 07 June 2017 01:48
What do you mean with "old UC data" - is there any newer one?

No, it's data from original Urban Chaos mod for vanilla Ja2, there is no 'newer' original mod.

Quote:
So I have my JA2+v1.13 folder and I just copy the data from the downloaded folder inside it and overwrite everything and then start the mod via the INI Editor, correct?


You need to install UC-1.13 mod according to instructions:
- Vanilla Ja2
- 1.13
- UC-1.13
- copy Data-UC folder into your game folder so that new UC mod will have access to original data.



Stable 7609+fix (21.05.2017)
Stable 7609+AI (r473 21.08.2017)
Improved weapon sounds
Youtube channel


Re: UC-1.13 Discussions and Bug Reporting (2013/03/07 to 201-/--/--)[message #349992 is a reply to message #349987] Wed, 07 June 2017 16:21 Go to previous messageGo to next message
Huberclim

 
Messages:34
Registered:May 2011
Location: Germany
It finally works!! Thank you sevenfm and Wil for all the help. happy

Just to make sure: I have installed the 7609 stable release of v113 and I use the original UC data and the latest UC 113 patch: Urban Chaos-1.13 v4.50.1 Patch 20150418.

When I start the game through the INI editor, I select as "Select JA2 v1.13 MOD" the following: "vfs_config.UC113 - 2014 Stable.ini". Or shall I rather use "vfs_config.UC113.ini"?

Nevertheless I also selected as "Select INI-File:" "Data-UC113\JA2_Options.INI".

Is this all correct? happy

When starting the game after Intro a small error occured. It was about SPOTTER_PREPARATIONTURNS and it said there was an invalid value chosen. I changed it to 3 in the INI editor and then it never occured. Do I need to worry about this?

Thanks,
H
Re: UC-1.13 Discussions and Bug Reporting (2013/03/07 to 201-/--/--)[message #350144 is a reply to message #349992] Wed, 21 June 2017 18:58 Go to previous messageGo to next message
Wil473

 
Messages:2815
Registered:September 2004
Location: Canada
Huberclim wrote on Wed, 07 June 2017 08:21
It finally works!! Thank you sevenfm and Wil for all the help. happy

Just to make sure: I have installed the 7609 stable release of v113 and I use the original UC data and the latest UC 113 patch: Urban Chaos-1.13 v4.50.1 Patch 20150418.

When I start the game through the INI editor, I select as "Select JA2 v1.13 MOD" the following: "vfs_config.UC113 - 2014 Stable.ini". Or shall I rather use "vfs_config.UC113.ini"?

Nevertheless I also selected as "Select INI-File:" "Data-UC113\JA2_Options.INI".

Is this all correct? happy

When starting the game after Intro a small error occured. It was about SPOTTER_PREPARATIONTURNS and it said there was an invalid value chosen. I changed it to 3 in the INI editor and then it never occured. Do I need to worry about this?

Thanks,
H


If you are using the old v1.13 "Stable" from 2014 please use vfs_config.UC113 - 2014 Stable.ini. I'm rather certain that the Spotter feature was added after the last "Stable" version of v1.13.


General Update:
I'm making progress with figuring out how to script merchants to appear - I've also modified maps to move the civs around so as to make room for the LUA added merchants. So far the list of new merchants is as follows:

Toggle Spoiler



Additionally, I just figured out the syntax to make different merchants to appear based on town loyalty, but considering the long list it will only be used intermittently. Some merchants will start off only willing to sell you bottled water at an inflated price, some will try to profiteer throughout the entire game, and some will change their inventory and pricing according to town loyalty. Availability of items is already tilted towards the easy side (vs. original JA2 and even Urban Chaos mod) by Bobby Ray's being able to deliver to most cities, and the extra speaking NPC merchants. I'd suggest playing with food usage on when this is ready for download (soon).



More weapon features and upgrade options, via (mis)use of v1.13 for vanilla Arulco, Dedrianna Lives! and Urban Chaos campaigns.


Re: UC-1.13 Discussions and Bug Reporting (2013/03/07 to 201-/--/--)[message #350191 is a reply to message #350144] Fri, 30 June 2017 07:10 Go to previous messageGo to next message
Wil473

 
Messages:2815
Registered:September 2004
Location: Canada
Double posting, as it is Experimental time again:
Urban Chaos-1.13 Full Experimental 8 v4.6x 20170629

Tested (briefly) on: SCI_Unstable_Revision_8408_on_GameDir_2364 (June 16, 2017 SCI) available HERE

Major Notes:
  • AmmoTypes.XML finally up to date as far as tags
  • Flugente's Non-Profile Merchants feature implemented (in-complete)
    - - Surface Maps only so far
    - - Some merchants increasing prices as Loyalty hits specific triggers is intentional and is not a bug
    - - Somewhat complete list of the new merchants in the mod so far:
    Toggle Spoiler



More weapon features and upgrade options, via (mis)use of v1.13 for vanilla Arulco, Dedrianna Lives! and Urban Chaos campaigns.


Re: UC-1.13 Discussions and Bug Reporting (2013/03/07 to 201-/--/--)[message #350377 is a reply to message #350191] Sat, 22 July 2017 22:15 Go to previous message
wolf00

 
Messages:1131
Registered:September 2006
Location: Czech Republic

9x18 makarov , .380 acp ammo or .32 acp when i try sell this to locals from sector inventory prize is set to zero[no money from sell] this is common for dl/afs/uc mod ,it is a bug or feature?

[Updated on: Sat, 22 July 2017 22:15]




caliber's: .41Lc,.45Lc,.455british,.380[9x17].410 . not in game at this time ...Dr Zelenka can help you ;o}R.M SgAmb asrock a75m amd x6 3670be 4gb ram hdd 1tbb sgt,zvuk creative x-fi extreme audio case z-7
Previous Topic: The 2nd Weapons & Items Requests for UC-1.13/DL-1.13/AFS thread
Goto Forum:
  


Current Time: Thu Aug 24 11:29:46 EEST 2017

Total time taken to generate the page: 0.02532 seconds