Home » PLAYER'S HQ 1.13 » JA2 Complete Mods & Sequels » JA2 Wildfire » JA2 1.13 Wildfire 6.06
Re: JA2 1.13 Wildfire 6.06[message #210428] Tue, 17 March 2009 14:42 Go to previous messageGo to next message
herb

 
Messages:417
Registered:September 2007
Location: Slovenija
Well I have a filling that I was misunderstanded. Nevertheless I thought this is a whole new mod, because of great maps. So maybe next time also new REAL story line.
Re: JA2 1.13 Wildfire 6.06[message #210440] Tue, 17 March 2009 21:36 Go to previous messageGo to next message
adim

 
Messages:19
Registered:November 2007
Location: Bulgaria
As far as I know, the story is almost hard coded, so it's probably impossible to make real NEW story Smile no matter of mod-makers wishes...
Re: JA2 1.13 Wildfire 6.06[message #210448] Tue, 17 March 2009 23:42 Go to previous messageGo to next message
smeagol

 
Messages:2710
Registered:June 2008
Location: Bremen, Germany
In fact the story of the original WF didn't change too much about the story line from regular JA2 (as far as I can tell).


Re: JA2 1.13 Wildfire 6.06[message #210482] Wed, 18 March 2009 12:56 Go to previous messageGo to next message
Romualdas Arm

 
Messages:52
Registered:June 2001
Location: Tyumen, Russia

Adim
As far as I know, the story is almost hard coded, so it's probably impossible to make real NEW story Smile no matter of mod-makers wishes...


It does not matter how big are the differences - any small change in a single map which tied to story cutscenes not tied to engine changes and vice versa will cause big troubles.

But while JA2 1.13 is source based mod, technically there is no problem to apply new story - it's only the question of programmers qualification and... time... The last one is the reason why there are not so big differences in Ja2 Wildfire to original JA2 - applying completely new story request too much time... and while the engine itself is of terrible quality it was considered worthless...

Re: JA2 1.13 Wildfire 6.06[message #210495] Wed, 18 March 2009 16:41 Go to previous messageGo to next message
svean

 
Messages:66
Registered:August 2005
Is there any new (SVN?) version of WildFire working with 100 AP (And NIV system?).

I tried that 100AP version and it's in my opinion a good step to make JA2 better so it would be nice to see WilFire with that...
Re: JA2 1.13 Wildfire 6.06[message #210500] Wed, 18 March 2009 19:11 Go to previous messageGo to next message
adim

 
Messages:19
Registered:November 2007
Location: Bulgaria
" I'm using "JA2_2008_12_08(SVN 2445).exe" version. Runs normal, CTD only about once an hour Smile "... with 100AP and NIV
Re: JA2 1.13 Wildfire 6.06[message #210507] Wed, 18 March 2009 20:03 Go to previous messageGo to next message
Viebator

 
Messages:13
Registered:February 2009
sector M9, fortified position, I suffer game freeze everytime alarm starts (right after siren, before lights go on), otherwise game seems pretty stable so far

good work
Re: JA2 1.13 Wildfire 6.06[message #210511] Wed, 18 March 2009 21:11 Go to previous messageGo to next message
smeagol

 
Messages:2710
Registered:June 2008
Location: Bremen, Germany
Viebator
sector M9, fortified position, I suffer game freeze everytime alarm starts (right after siren, before lights go on), otherwise game seems pretty stable so far

good work


That freeze should usually end after some time, as the game needs some time to set up all lights. Have you waited a moment, to see what happens?


And yes, the mod is compatible with 100AP (I'm currently playing with it).


Re: JA2 1.13 Wildfire 6.06[message #210557] Thu, 19 March 2009 14:03 Go to previous messageGo to next message
Viebator

 
Messages:13
Registered:February 2009
I didnt wait more than 15 minutes Very Happy no clocks displayed, just freeze without option to go back to windows

[Updated on: Thu, 19 March 2009 14:03] by Moderator

Re: JA2 1.13 Wildfire 6.06[message #210569] Thu, 19 March 2009 15:11 Go to previous messageGo to next message
smeagol

 
Messages:2710
Registered:June 2008
Location: Bremen, Germany
Viebator
I didnt wait more than 15 minutes Very Happy no clocks displayed, just freeze without option to go back to windows


M9 is the weapon cache near Balime, right?

That's strange that you get a freeze there, in my current game I took the sector without any problems (and the alarm was started as well). Maybe you should try to go there at a different time of day to see if that would work.


Re: JA2 1.13 Wildfire 6.06[message #210688] Fri, 20 March 2009 12:59 Go to previous messageGo to next message
svean

 
Messages:66
Registered:August 2005
Adim
" I'm using "JA2_2008_12_08(SVN 2445).exe" version. Runs normal, CTD only about once an hour Smile "... with 100AP and NIV


And is there anyone using also HAM (with supression fire) and maybe Alpha Item mod?

I'm going to start a new game and I wonder how many new things I might test at once Wink
Re: JA2 1.13 Wildfire 6.06[message #210699] Fri, 20 March 2009 15:27 Go to previous messageGo to next message
lockie

 
Messages:3928
Registered:February 2006
Location: Scotland
Why dont YOU try em out and let the rest of us know Wink


Re: JA2 1.13 Wildfire 6.06[message #210705] Fri, 20 March 2009 16:13 Go to previous messageGo to next message
Ianthi

 
Messages:27
Registered:March 2009
hi there...

since resolving the sound problem i have been playing at Insane mode and really love it.i will be returning here for all my observations after i finish the game.
although there is something i do not understand. my team reaches only 18 mercs when in the ini. that i checked it says 24. when i try to hire a new one the game tells me that my team is complete.
how can i make this work?

thank you in advance
looking forward to your reply
Re: JA2 1.13 Wildfire 6.06[message #210707] Fri, 20 March 2009 16:18 Go to previous messageGo to next message
smeagol

 
Messages:2710
Registered:June 2008
Location: Bremen, Germany
Ianthi
hi there...

since resolving the sound problem i have been playing at Insane mode and really love it.i will be returning here for all my observations after i finish the game.
although there is something i do not understand. my team reaches only 18 mercs when in the ini. that i checked it says 24. when i try to hire a new one the game tells me that my team is complete.
how can i make this work?

thank you in advance
looking forward to your reply


You will probably need to run the game with a ManyMercs .exe in order to get the benefits of more team members (though changing the game exe will probably force a restart of the game, as the save game will probably not be compatible).


Re: JA2 1.13 Wildfire 6.06[message #210710] Fri, 20 March 2009 16:33 Go to previous messageGo to next message
Ianthi

 
Messages:27
Registered:March 2009
ManyMercs.exe? where can i get it? and how can i use it?

is it possible to have initially 6imp mercs all male or female instead of 3 males and 3 females?
Re: JA2 1.13 Wildfire 6.06[message #210717] Fri, 20 March 2009 17:40 Go to previous messageGo to next message
smeagol

 
Messages:2710
Registered:June 2008
Location: Bremen, Germany
Ianthi
ManyMercs.exe? where can i get it? and how can i use it?

is it possible to have initially 6imp mercs all male or female instead of 3 males and 3 females?


Just look for a post from SpaceViking, he has a download link in his signature.

As for the imps: you'll have to use 3 male and 3 female, as they are tied to the voice sets for the imps. 3 voice sets for male characters and 3 for the females.


Re: JA2 1.13 Wildfire 6.06[message #210720] Fri, 20 March 2009 19:50 Go to previous messageGo to next message
Ianthi

 
Messages:27
Registered:March 2009
smeagol:

and so i did. but when i click on this B007.exe icon and after i followed the site's instructions it falls through. says something about the ini. and crashes. i mean i put the files on the ja folder and when i restart a new game i tried to hire more than 18 mercs just to try it and it did not allow me to do so.

i even unistalled and reinstalled the hole game process but the same happens. what am i missing here?
please any help
Re: JA2 1.13 Wildfire 6.06[message #210721] Fri, 20 March 2009 19:59 Go to previous messageGo to next message
smeagol

 
Messages:2710
Registered:June 2008
Location: Bremen, Germany
As far as I remember, you'll need the JA2_options.ini placed in the Data-Wildfire6.06 (or whatever it is called in your installation) folder. At least that's what I did, and for me it works...



Re: JA2 1.13 Wildfire 6.06[message #210724] Fri, 20 March 2009 20:37 Go to previous messageGo to next message
Ianthi

 
Messages:27
Registered:March 2009
smeagol: is it because i have a version installed of 1.13 1.0.0.2085? do i have to install another version? and how can i have a fully up to date version with all new fixtures and stuf (PCM, S.V. ManyMercs Mod, PossumDBB and H.A.M. 2.Cool ?
could you please tell me the order of each installation? and how to install each one?
i mean i read the various threads here but i am lost... it is caotic.

i am just not an expert on computers and i am trying to figure out everything here.

thank you smeagol
waiting your detailed guide of complete installation from the beginning so that i can have all of the above.
Re: JA2 1.13 Wildfire 6.06[message #210726] Fri, 20 March 2009 20:54 Go to previous messageGo to next message
Ianthi

 
Messages:27
Registered:March 2009
smeagol: i just clicked on the "kaerar's one click installer" and it seems i am downloading PCM plus B007c SVN. can i install this on my already existing 1.13 wf6.06 folder?
i am afraid i messing everything up here.

Re: JA2 1.13 Wildfire 6.06[message #210727] Fri, 20 March 2009 20:59 Go to previous messageGo to next message
smeagol

 
Messages:2710
Registered:June 2008
Location: Bremen, Germany
I agree, it's really a mess to get a working version. But once you did it, you know, why it was worth the effort. Smile


Your easiest bet would probably be to get Scheinworld's one-click installer.

Link to forum thread for one-ckick installer

Then get the WF Mod package, follow the steps in the read-me (that is, copy and rename the Data-1.13 folder), unzip the WF_Mod. And you're ready to go.


Also don't miss the AlphaItem Mod and the updated maps (just follow the download links in my sig) Smile


Hope this helps to set things up.



Re: JA2 1.13 Wildfire 6.06[message #210731] Fri, 20 March 2009 21:41 Go to previous messageGo to next message
Ianthi

 
Messages:27
Registered:March 2009
ok i am doing it .... what about cosplay/DBB mod for weapons. do i have to install it too?

and on what concerning the AlphaItem Mod... i downloaded all the 13 files... what do i do? i extract each one of them and place them in the ja2 folder or the data of 1.13 or in the one 1.13wf6.06 which first?

(oh my God!!! this is an unbelievable maze- isn't there a way to install all this new things in just one click installer?) i have no idea what to do first...

thank you
waiting for your answer
Re: JA2 1.13 Wildfire 6.06[message #210734] Fri, 20 March 2009 21:56 Go to previous messageGo to next message
lockie

 
Messages:3928
Registered:February 2006
Location: Scotland
Quote:
what about cosplay/DBB mod for weapons. do i have to install it too?
Nup !

Quote:
i downloaded all the 13 files... what do i do? i extract each one of them and place them in the ja2 folder or the data of 1.13 or in the one 1.13wf6.06 which first?
Only need the last (number 15) ,and they go into the wildfire data folder ,. When you have extracted into the WF Data folder open the new (item)folder and cut/paste all folders back into the WF data folder , yes to all overwrites .

Quote:
(oh my God!!! this is an unbelievable maze- isn't there a way to install all this new things in just one click installer?) i have no idea what to do first...
HAHAHA! Sorry , been there too mate , keep on trying and within a few months you'll know how to modify your mods ....
or you'll lose most of your hair in clumps :silly:


Re: JA2 1.13 Wildfire 6.06[message #210743] Fri, 20 March 2009 23:16 Go to previous messageGo to next message
Ianthi

 
Messages:27
Registered:March 2009
smeagol or lockie: about ham beta 2.8 and possum mod?
can i install them now as well?
Re: JA2 1.13 Wildfire 6.06[message #210745] Fri, 20 March 2009 23:20 Go to previous messageGo to next message
lockie

 
Messages:3928
Registered:February 2006
Location: Scotland
Haven't tried either of them , so , play what you've got first to ensure all ok , then experiment a little if you want AFTER having read a bit about each mod/mod . Good luck :ok:


Re: JA2 1.13 Wildfire 6.06[message #210747] Fri, 20 March 2009 23:29 Go to previous messageGo to next message
Ianthi

 
Messages:27
Registered:March 2009
ok maybe i'll let things like this for now.

just one more thing
the ja2 ini. that i see in my data1.13 folder is different from the ones (ja2.ini and wf6.06.ini) that i find in the datawf6.06 folder. so for rearranging the number of my merc team (up to 32) where do i change it? (i also have to say that the 2 .ini files in the datawf6.06 folder are smaller and there is no mentioning on the number of mercs i can have.) do i have to delete them and replace them with a copy of the first one? or do i simply have to copy/paste the one from data1.13 overwriting it?

waiting for reply
thank you
Re: JA2 1.13 Wildfire 6.06[message #210748] Fri, 20 March 2009 23:48 Go to previous messageGo to next message
lockie

 
Messages:3928
Registered:February 2006
Location: Scotland
I'm fairly sure you only need to alter the first .ini editor in the root (main) folder . Think all info etc. there , I don't use it much , sorry . Click on ini editor exe. to start .

[Updated on: Fri, 20 March 2009 23:50] by Moderator



Re: JA2 1.13 Wildfire 6.06[message #210752] Sat, 21 March 2009 00:16 Go to previous messageGo to next message
Ianthi

 
Messages:27
Registered:March 2009
ok i resolved that, but i do not like the 100AP system. how can i return to the old one?
is it possible?
Re: JA2 1.13 Wildfire 6.06[message #210763] Sat, 21 March 2009 11:33 Go to previous messageGo to next message
lockie

 
Messages:3928
Registered:February 2006
Location: Scotland
yes , but why not give 100 ap a real chance before you return to 'normal' points ? It's not at all bad ! Read a few threads about the system , this game isn't a 'pick up ,play , then throw away type of game , it's thoughtful Very Happy

( you realise I'm 'encouraging' you to do your own research here :coffee: ) Very Happy


Re: JA2 1.13 Wildfire 6.06[message #210770] Sat, 21 March 2009 15:05 Go to previous messageGo to next message
Ianthi

 
Messages:27
Registered:March 2009
ok.
then i'll give it a try. new game new APsystem. fine.

one thing though... while testing in the beginning always getting to drasen in day 1 i realised that the maps change everytime. the first time the airport in drassen was a new map and the next time i restarted it was not. why is this happening? it means that i will not be playing all the new maps afterall since a few appear and a few do not.
Re: JA2 1.13 Wildfire 6.06[message #210778] Sat, 21 March 2009 19:15 Go to previous messageGo to next message
smeagol

 
Messages:2710
Registered:June 2008
Location: Bremen, Germany
Ianthi
ok.
then i'll give it a try. new game new APsystem. fine.

one thing though... while testing in the beginning always getting to drasen in day 1 i realised that the maps change everytime. the first time the airport in drassen was a new map and the next time i restarted it was not. why is this happening? it means that i will not be playing all the new maps afterall since a few appear and a few do not.


Some maps have alternate versions. The game choses on a fifty-fifty basis, when a new game is started. This helps to increase re-play value. Wink


Re: JA2 1.13 Wildfire 6.06[message #210792] Sun, 22 March 2009 00:28 Go to previous messageGo to next message
Burzmali

 
Messages:241
Registered:March 2007
Location: Estonia
There has been some small trouble with militia. Grumm now is on lines F, G and H. When I take that small militia map to redistribute them, there are G, H and I lines on it and I can not send anybody into F2. If I train militia long enough, that sector will also be filled.

In Balime I had L11 and L12 full of "green" militia. L11 was attacked and lost
Re: JA2 1.13 Wildfire 6.06[message #210877] Mon, 23 March 2009 04:07 Go to previous messageGo to next message
Ianthi

 
Messages:27
Registered:March 2009
just took Palmas and there is no Deidranna saying "Elliot you idiot!"etc. is this normal?

is there a thread here where fans can exchange suggestions or ideas for future updates of the
ja21.13wf6.06?
Re: JA2 1.13 Wildfire 6.06[message #211058] Wed, 25 March 2009 07:06 Go to previous messageGo to next message
Romualdas Arm

 
Messages:52
Registered:June 2001
Location: Tyumen, Russia

Ianthi
just took Palmas and there is no Deidranna saying "Elliot you idiot!"etc. is this normal?

is there a thread here where fans can exchange suggestions or ideas for future updates of the
ja21.13wf6.06?


Yes, it's normal
Re: JA2 1.13 Wildfire 6.06[message #211288] Sat, 28 March 2009 01:44 Go to previous messageGo to next message
Ianthi

 
Messages:27
Registered:March 2009
i started a new topic on Combat Academy on various new ideas for the ja2 1.13wf6.06 but now that i came back i just can't find it anymore.

anyone knows where it is?
someone called Will Gates (i think) mentioned something about the possibility of training militia in Omerta, plus the fact that i could you some empty slots i don't remember the number to add some own characters, probably he was talking about the ini. file.

can anyone answer ?
Re: JA2 1.13 Wildfire 6.06[message #211300] Sat, 28 March 2009 09:21 Go to previous messageGo to next message
Logisteric

 
Messages:3396
Registered:December 2008
Location: B
my stuff / my posts

[Updated on: Sat, 28 March 2009 10:11] by Moderator

Re: JA2 1.13 Wildfire 6.06[message #211312] Sat, 28 March 2009 13:01 Go to previous messageGo to next message
Off_Topic

 
Messages:1037
Registered:January 2009
@ lanthi: I moved it to feature request where it semi belongs... if you use the "Active Topics" feature you should be able to see it.


Re: JA2 1.13 Wildfire 6.06[message #211429] Sun, 29 March 2009 14:21 Go to previous messageGo to next message
Nosko

 
Messages:15
Registered:May 2008
Location: Slovenia
Hey!

I have a problem Sad This is the first time I started playing game without hiring mercs. I only made 4 IMPs and later got Ira and Dimitri. Now if I want to hire AIMs, everyone says that I
Re: JA2 1.13 Wildfire 6.06[message #211434] Sun, 29 March 2009 15:05 Go to previous messageGo to next message
lockie

 
Messages:3928
Registered:February 2006
Location: Scotland
Quote:
Now if I want to hire AIMs, everyone says that I


Re: JA2 1.13 Wildfire 6.06[message #211438] Sun, 29 March 2009 15:43 Go to previous messageGo to previous message
Ianthi

 
Messages:27
Registered:March 2009
Nosko :

it happened to me too. i had meltdown that many did not like. then when i fired her noone wanted to come to my team from the AIM. so i moved on a bit by myself and conquered a city, i think, so after a while everything returned to normal and i was able to rehire from thst agency.
i do not know, maybe is one of the features of this game.... boooh
you could try the same... after a while it unblocks
Previous Topic: JA2 Wildfire maps on JA2 gold with 1.13 mod
Next Topic: install and run wildfire 6.07 mod (1.13) with latest JA2 1.13 mod?
Goto Forum:
  


Current Time: Thu Aug 16 16:58:52 EEST 2018

Total time taken to generate the page: 0.01940 seconds