Home » MODDING HQ 1.13 » v1.13 Idea Incubation Lab  » Single Click Installer for 1.13
Re: Single Click Installer for 1.13[message #262170] Sat, 11 September 2010 01:18 Go to previous messageGo to next message
Lord_Danil

Messages:4
Registered:September 2010
Loucipher
but I guess the game recognizes which language version it is and reads the right XML file.


Are you sure? How this thing work?
Re: Single Click Installer for 1.13[message #262290] Sun, 12 September 2010 00:26 Go to previous messageGo to next message
Loucipher

 
Messages:161
Registered:October 2009
Sure? Hell, no. As stated above, that's my guess. Don't have any localized JA2 version at hand, so I cannot test it. Whoever can do that, is welcome to post results. Maybe the 1.13 authors themselves chime in as well... they should know how the exe's innards work.
Re: Single Click Installer for 1.13[message #262297] Sun, 12 September 2010 02:11 Go to previous messageGo to next message
Lord_Danil

Messages:4
Registered:September 2010
Ok. So we will wait for they reply... Smile

[Updated on: Sun, 12 September 2010 18:24] by Moderator

Re: Single Click Installer for 1.13[message #263306] Thu, 23 September 2010 01:30 Go to previous messageGo to next message
griffit

 
Messages:8
Registered:June 2003
I have a problem with windows 7: I downloaded the last SVN and extracted to JA2 folder but the new JA2 1.13 .exe is not present and I can't run it, anyway if I run the standard JA2.exe it is reported JA2 1.13 in the first screen but the game is still in vanilla version.

I didn't have this problem with Vista, how can I fix it?
Re: Single Click Installer for 1.13[message #263538] Sat, 25 September 2010 00:40 Go to previous messageGo to next message
Reschke

 
Messages:7
Registered:September 2010
OK I can't get any of these to download now...it gets to the end and then says that the file isn't valid.
Re: Single Click Installer for 1.13[message #263545] Sat, 25 September 2010 04:17 Go to previous messageGo to next message
Yoshi

 
Messages:45
Registered:January 2008
Location: Portugal
The "new" exe should override the old one. And why in heck are you asking that question on the SCI thread? The SCI should work properly... But anyways, when in doubt, use the INI Editor to launch the game. Be sure to choose the "vfs_config.JA2113.ini". And as for SVN, don't use "SVN Checkout" on the folder where you installed JA2. Download the SVN on a separate folder, and then move the files over to your JA2 folder, overwriting everything. (I presume you're using Tortoise SVN, since it's quite simple to use Wink ). Also... Never trust UAC, it's rather useless IMO. It makes me cringe Mad

[Updated on: Sat, 25 September 2010 04:24] by Moderator

Re: Single Click Installer for 1.13[message #264633] Sun, 10 October 2010 12:14 Go to previous messageGo to next message
Brokenail
Messages:1
Registered:October 2010
Hello and thank you for this great mod.

It seems that this mod does save in another folder than the original one. Could you tell me where to find those saves, please ?

Thank you

[Updated on: Sun, 10 October 2010 12:39] by Moderator

Re: Single Click Installer for 1.13[message #264637] Sun, 10 October 2010 13:11 Go to previous messageGo to next message
silversurfer

 
Messages:2462
Registered:May 2009
In your game folder take a look into "Profiles\UserProfile_JA2113\SavedGames\".

Re: Single Click Installer for 1.13[message #265715] Tue, 26 October 2010 20:46 Go to previous messageGo to next message
DepressivesBrot

 
Messages:3809
Registered:July 2009
Always depends on what version of 1.13 you were using before, every now and then, one of them breaks with old saves, but not often.

What Logi (likely) wanted to say:
He would have liked some cool feature which would have broken saves, but Headrock didn't implement it for whatever reason.

Just try if it works, but make a copy of your current install before updating.


Re: Single Click Installer for 1.13[message #265716] Tue, 26 October 2010 20:55 Go to previous messageGo to next message
Logisteric

 
Messages:3396
Registered:December 2008
Location: B
guys, this (my) post is nearly a year old - those where different versions all together from what we have now

what i wanted to say, was that hadrock refused to do some changes (he said he could do them but won't because they would have been save-breakers) and that's why he (whoever asked that question) could use old saves

iron hair, if your saves are from the same revision as his (whoever asked that question) were AND the new one is uptodate: FORGET IT

if you don't know i'd like to advise debri's advise
Re: Single Click Installer for 1.13[message #265720] Tue, 26 October 2010 22:03 Go to previous messageGo to next message
ironhair

 
Messages:9
Registered:October 2010
wow.. the forums sure can be active at times Smile

I didnt mean to pin Logisteric down, I was reading through the pages and it seemed to me that I could use my JA2 Gold saves and continue playing in the modded 1.13.

Sounded too good to be true, so asked for a clarification.

In a nutshell, as I am using JA2 Gold (1.10) and the new revision is 1.13, it wont work.

I'm going to edit my starting IMP in 1.13 to the same stats my grown up merc had in 1.10 and then start afresh.

For other players with the same question as mine in the future:
I was reading http://jaggedalliance2.pbworks.com/Getting-Started and it says that I can change START_ATTRIBUTE to 100 in JA_options.ini.

Anyways, thanks Gorro, DB and Logisteric Smile

Re: Single Click Installer for 1.13[message #265722] Tue, 26 October 2010 22:08 Go to previous messageGo to next message
Gorro der Grüne

 
Messages:1542
Registered:March 2009
Location: Broadwurschd-City
in 1.13 you may edit Your 6 IMPs
Re: Single Click Installer for 1.13[message #266271] Thu, 04 November 2010 14:30 Go to previous messageGo to next message
Snausage

 
Messages:7
Registered:January 2007
I have JA2 gold. Do I need to install Wildfire too?

Installed 1.13 again on a fresh install (of just JA2 Gold) and when I got to Alma, it crashes shortly after the explosion on the wall.

Loaded, tried again. Same result.
Re: Single Click Installer for 1.13[message #266272] Thu, 04 November 2010 14:58 Go to previous messageGo to next message
Gorro der Grüne

 
Messages:1542
Registered:March 2009
Location: Broadwurschd-City
No You must not install retail-WF too.

Gold, I click, perhaps some fixes + newer AIMNAS
Re: Single Click Installer for 1.13[message #268866] Thu, 23 December 2010 23:48 Go to previous messageGo to next message
Max_for_Hire

 
Messages:33
Registered:March 2009
Are there any new SCI's for STOMP, HAM, AIM and WildFire around??

It's been a while since I changed my SCI install. Didn't keep track properly!

[Updated on: Thu, 23 December 2010 23:52] by Moderator

Re: Single Click Installer for 1.13[message #270005] Wed, 12 January 2011 05:06 Go to previous messageGo to next message
Beky
Messages:3
Registered:May 2008
Greetings everyone!


First of all, thanks to all of you guys that made your contribution to make this game so awesome...
I'm a big fan of JA, and because of you I will probably always be Smile

Can you help me with something...

I just finished instaling:
JA2 Gold + JA2 1.13 3356 exe SVN@1227 Full + JA2_MP_EN_v1.5

I saw that, after installing patch, AP scoring and shooting chrosshair size changed (chrosshair size cannot be small as head, like without a patch)... ?

Is that a result of a new patch or it can be changed somewhere in the preferences ?


One more thing for all you guys with WIDESCREENS and ATI video cards,
here is a patch that will unlock your video card scalling option,
so that the screen will be automaticaly streched to fit the screen correctly,
even if your screen resolution is WIDE:

http://forums.amd.com/game/messageview.cfm?catid=279&threadid=125270


:: cheers ::

[Updated on: Wed, 12 January 2011 05:10] by Moderator

Re: Single Click Installer for 1.13[message #270011] Wed, 12 January 2011 05:53 Go to previous messageGo to next message
usrbid

 
Messages:1558
Registered:December 2008
I want to help / answer but I don't know what the question is?

In 1.13 extra aim clicks make the aim circle smaller until you reach maximum aim clicks at which point the circle color changes to yellow, meaning you cannot spend more aim clicks to improve your chance to hit (CTH). (I forget how Vanilla handles this, I know for sure that you can spend extra aim clicks here too.)

The size of the circle stays the same in 1.13 for burst and auto fire, however the CTH indicator bar above the aim circle shows the CTH at start and end of your shooting sequence.

In 1.13 the Options.ini file has many (a lot) of different things you can change for your custom game experience.


Re: Single Click Installer for 1.13[message #270032] Wed, 12 January 2011 13:08 Go to previous messageGo to next message
Beky
Messages:3
Registered:May 2008
Heey, thanks for quick respond!


Sorry, I didn't express myself well.

Smallest size of my single-shot aim circle was the same as for the burst and auto fire.
It cannot be smaller as before the mod. Why is that so? Is that the new type of aim circle in 1.13 version,
or it's just some setting that can be changed?

If you need pics, I'll upload them ???


Thx Wink
Re: Single Click Installer for 1.13[message #270072] Wed, 12 January 2011 17:06 Go to previous messageGo to next message
Beky
Messages:3
Registered:May 2008
Beky
Heey, thanks for quick respond!


Sorry, I didn't express myself well.

Smallest size of my single-shot aim circle was the same as for the burst and auto fire.
It cannot be smaller as before the mod. Why is that so? Is that the new type of aim circle in 1.13 version,
or it's just some setting that can be changed?

If you need pics, I'll upload them ???


Thx Wink


Here is what I want...

Check the pictures first:

With 1.13 MOD:
http://img823.imageshack.us/img823/5968/ja2mod113.png

Without MOD:
http://img651.imageshack.us/img651/6770/ja2withoutmod.png

The smallest size of the aim cirle was too big.
I want to change it, like it was without MOD ???


Thx Wink

[Updated on: Wed, 12 January 2011 18:16] by Moderator

Re: Single Click Installer for 1.13[message #270143] Thu, 13 January 2011 01:36 Go to previous messageGo to next message
asako

 
Messages:15
Registered:December 2009
So, whenever I hit that link that leads to goc_man's SCI I get some UBB message that says: There was a problem looking up this post in our database.

Would anyone happen to have just that SCI link?
Re: Single Click Installer for 1.13[message #270153] Thu, 13 January 2011 05:44 Go to previous messageGo to next message
usrbid

 
Messages:1558
Registered:December 2008
@Don: I think Tais SCI is the latest one.

@Beky: You know, I really never paid much attention to that, I believe that in 1.13 the aim circle size might not change maybe? Instead the chance to hit and the AP costs are updated. Unfortunately I can't start a game at the moment and confirm the aim circle size.


Re: Single Click Installer for 1.13[message #270161] Thu, 13 January 2011 06:42 Go to previous messageGo to next message
asako

 
Messages:15
Registered:December 2009
I see...
Now I saw a post, from goc_man no less, linking to it. Unfortunately it an invalid one, as the file it had in store was either deleted or otherwise removed...
But in the meantime I'll search for others.
Re: Single Click Installer for 1.13[message #270269] Fri, 14 January 2011 09:00 Go to previous messageGo to next message
usrbid

 
Messages:1558
Registered:December 2008
goc_man hasn't posted for a couple months, his first post was today or yesterday, so his SCI may be older / outdated. Try Tais SCI, I am not super sure where the official forum for it is, but I believe this one could be it.


Re: Single Click Installer for 1.13[message #274988] Thu, 03 March 2011 17:17 Go to previous messageGo to next message
sean10mm

 
Messages:39
Registered:February 2007
I don't want to discourage people from trying Tais's SCI for the beta since it has a lot of neat features, but it's probably worth noting that it IS a beta with its share of issues (aim levels not working right based on scope used, no first aid kits or camo kits anywhere, scope minimum ranges all mixed up, etc.) so people who don't want to deal with those things probably should use the old release SCI posted at the start of this thread.
Re: Single Click Installer for 1.13[message #275007] Thu, 03 March 2011 18:43 Go to previous messageGo to next message
tais

 
Messages:807
Registered:February 2008
Location: NL
true, a lot of stuff that's being mentioned by people has already been fixed in the closed beta, maybe i should take the beta's offline


Re: Single Click Installer for 1.13[message #278150] Mon, 18 April 2011 20:43 Go to previous messageGo to next message
1000.sassa

 
Messages:36
Registered:October 2009
quick question: Is there a big difference between Schein's latest german 1.13 and the latest english 1.13 version?
Re: Single Click Installer for 1.13[message #278152] Mon, 18 April 2011 20:47 Go to previous messageGo to next message
Logisteric

 
Messages:3396
Registered:December 2008
Location: B
schein's latest is how old exactly?
Re: Single Click Installer for 1.13[message #278163] Mon, 18 April 2011 22:35 Go to previous messageGo to next message
1000.sassa

 
Messages:36
Registered:October 2009
That's the name: Allinone9_BETA_SVN1194__ja2_release_3111_de
Re: Single Click Installer for 1.13[message #278164] Mon, 18 April 2011 23:16 Go to previous messageGo to next message
Logisteric

 
Messages:3396
Registered:December 2008
Location: B
stoneages
Re: Single Click Installer for 1.13[message #278165] Mon, 18 April 2011 23:26 Go to previous messageGo to next message
1000.sassa

 
Messages:36
Registered:October 2009
Thx for the info so I'll take the newest english one!
Re: Single Click Installer for 1.13[message #278272] Wed, 20 April 2011 19:39 Go to previous message
Dismay
Messages:1
Registered:April 2011
I'm trying to download the installation file, however i always gen an error when it's 99%. I tried downloading previous version but same thing. Is there is mirror for the file ?
Previous Topic: Faster Miguel & Carlos INI option
Next Topic: sticom - comprehensive command line tool for processing STI files
Goto Forum:
  


Current Time: Thu Nov 15 14:42:14 EET 2018

Total time taken to generate the page: 0.01804 seconds