Home » PLAYER'S HQ 1.13 » JA2 Complete Mods & Sequels » UC/DL 1.13 & AFS » Alrulco Folding Stock Discussion & Bug Reports - (2011/08/06 - 20--/--/--)
Re: Alrulco Folding Stock Discussion & Bug Reports - (2011/08/06 - 20--/--/--)[message #315794] Thu, 28 February 2013 16:59 Go to previous messageGo to next message
Slax is currently offline Slax

 
Messages:1411
Registered:July 2006
Location: People riding polar bears...
The game allows for buckshot modding, right? .410 buck could do with less pellets. Real life values are pretty dang different for 12 gauge and .410 bore.

Oh, and thanks for sticking with it, wil. :cheers:

Report message to a moderator

Sergeant Major
Re: Alrulco Folding Stock Discussion & Bug Reports - (2011/08/06 - 20--/--/--)[message #315801] Thu, 28 February 2013 23:31 Go to previous messageGo to next message
wolf00 is currently offline wolf00

 
Messages:1148
Registered:September 2006
Location: Czech Republic

rate reducer/improved bolt causing mod to the ctd ...

http://img688.imageshack.us/img688/6038/screenshot2013022822130.jpg

Report message to a moderator

Sergeant Major
Re: Alrulco Folding Stock Discussion & Bug Reports - (2011/08/06 - 20--/--/--)[message #315802] Fri, 01 March 2013 02:23 Go to previous messageGo to next message
CapnJack is currently offline CapnJack

 
Messages:56
Registered:June 2012
Running on 5882 just fine. Requires you to add SquadNames.xml to TableData and move Pockets.xml and PocketPopups.xml from TableData\Inventory to TableData\Items for both Data-AFS and Data-1.13 folders.

Report message to a moderator

Corporal
Re: Alrulco Folding Stock Discussion & Bug Reports - (2011/08/06 - 20--/--/--)[message #315803] Fri, 01 March 2013 07:49 Go to previous messageGo to next message
Sargeno is currently offline Sargeno

 
Messages:69
Registered:December 2001
Location: Oregon, USA
Would this apply to AR as well?

Report message to a moderator

Corporal
Re: Alrulco Folding Stock Discussion & Bug Reports - (2011/08/06 - 20--/--/--)[message #315804] Fri, 01 March 2013 08:31 Go to previous messageGo to next message
K0ukku is currently offline K0ukku

 
Messages:188
Registered:December 2009
Me and wolf00 getting the same error screen... probably has something to do with the items because I get the error when I open up Tony's inventory (see page 7).

Report message to a moderator

Staff Sergeant
Re: Alrulco Folding Stock Discussion & Bug Reports - (2011/08/06 - 20--/--/--)[message #315805] Fri, 01 March 2013 08:43 Go to previous messageGo to next message
CapnJack is currently offline CapnJack

 
Messages:56
Registered:June 2012
I disabled Flugente's External Feeding and have had no incidents of crashes with initiating dealings with Tony after doing so many times during one play session. The thing is is you can't just reload a save and reproduce this crash. You can load a save from before dealing with Tony and deal with him several times and not crash or crash immediately. But if you go conquer a sector or something then return to Tony to sell the loot it usually crashes. Would be nice if others getting this crash could test this and report their findings from disabling External Feeding. I believe there may be some unintended behavior with Tony "feeding" players ammo but it's hard to say given the random nature of the crash. So far it has worked for me. Unfortunate since the mod was designed around the feature but I haven't found any awesome machine guns yet during my playing anyway.

A couple of other things of note. The SMLE has no dirt modifier and does not seem to get dirty from firing, this is probably unintended but maybe not. The Excel Arms x30-r also has this problem, there are probably others but I have not noticed any yet.

[Updated on: Fri, 01 March 2013 08:50] by Moderator

Report message to a moderator

Corporal
Re: Alrulco Folding Stock Discussion & Bug Reports - (2011/08/06 - 20--/--/--)[message #315809] Fri, 01 March 2013 15:05 Go to previous messageGo to next message
deknegt is currently offline deknegt

 
Messages:140
Registered:June 2007
Location: Doetinchem, Netherlands
Probably a silly mistake on my part, but when I go to the bullet train website in the laptop, I get the old flower shop text through the screen.

I think it's an install mistake, but if people could point me to the fix I would be much obliged.

Report message to a moderator

Sergeant
Re: Alrulco Folding Stock Discussion & Bug Reports - (2011/08/06 - 20--/--/--)[message #315810] Fri, 01 March 2013 15:06 Go to previous messageGo to next message
Wil473

 
Messages:2815
Registered:September 2004
Location: Canada
Thanks CapnJack for the reminder that they resorted the XML's again. Back on track with SCI_Unstable_Revision_5872_on_GameDir_1608 and JA2_5878.

Fixed - Igor's second kit comes with wrong ammo. (.40 S&W Pistol Mags)

Fixed - Buns's first kit comes with a match sight she can't attach. (removed the Match Sight)

Fixed - Taurus Public Defender has the same range for both .410 and .45 Colt. (found that most dual .410/.45 Colt weapons seemed to have the same range so added some appropriate differences)

Fixed - Beretta RX Storm (now uses generic 5.56 sounds instead of 9x19mm)

Fixed - PP-19 Bizon (PM) doesn't have slots for rod & spring (found all the new PM-19 variants were missing attachments)

Fixed - Saiga 410K (>) can't be unfolded. (found both item transformations missing)

Fixed - .410 Mag BS (10 rounds) has a description typo. (found that all .410 Buckshot rounds had the same description)

Fixed - PO 3.5 seems to cause a glitch where it can't be removed or right-clicked. Stats + Korsak slot still work. Currently happened on a Vityaz mod. stock. (wrong NAS layout)


Not a Bug - LE901 lower ejects a 7.62 NATO mag when combined.
- When you buy the LE901 Lower you get a free 7.62x51 mag. A dummy caliber was not used as I found weapons supplied by Bobby Rays that lack a valid magazine will not be produced in-game with default attachments.

Interestingly I am investigating this one difference between Upper Receivers and working AR's as a possible cause to the odd supply problems with uppers.


Slax
Same for the Stoner 63A Carbine, BR description at least.

- can you specify what the error is?

Slax
Looking at BRs, MagPul PDR and PDR-C seem to be identical. Well, other than the range.

- I can knock a point off Draw?

Slax
The game allows for buckshot modding, right? .410 buck could do with less pellets. Real life values are pretty dang different for 12 gauge and .410 bore.

- Yeah, I forgot to add a .410 Buckshot ammo type with less pellets, I'll see if I can fit it in, but it will probably impact save games.

Report message to a moderator

Lieutenant

Re: Alrulco Folding Stock Discussion & Bug Reports - (2011/08/06 - 20--/--/--)[message #315811] Fri, 01 March 2013 15:08 Go to previous messageGo to next message
Wil473

 
Messages:2815
Registered:September 2004
Location: Canada
deKnegt
Probably a silly mistake on my part, but when I go to the bullet train website in the laptop, I get the old flower shop text through the screen.

I think it's an install mistake, but if people could point me to the fix I would be much obliged.
Wrong Thread. Also what you are running into is a known issue, cannot be fixed until someone externalizes the text that's embedded in the .exe.

See: Urban Chaos-1.13 Hybrid FAQ - Read this before asking questions please

[Updated on: Fri, 01 March 2013 15:10] by Moderator

Report message to a moderator

Lieutenant

Re: Alrulco Folding Stock Discussion & Bug Reports - (2011/08/06 - 20--/--/--)[message #315812] Fri, 01 March 2013 15:41 Go to previous messageGo to next message
deknegt is currently offline deknegt

 
Messages:140
Registered:June 2007
Location: Doetinchem, Netherlands
My bad, thanks wil

[Updated on: Fri, 01 March 2013 15:42] by Moderator

Report message to a moderator

Sergeant
Re: Alrulco Folding Stock Discussion & Bug Reports - (2011/08/06 - 20--/--/--)[message #315815] Fri, 01 March 2013 16:29 Go to previous messageGo to next message
Slax is currently offline Slax

 
Messages:1411
Registered:July 2006
Location: People riding polar bears...
wil473
Slax
Same for the Stoner 63A Carbine, BR description at least.

- can you specify what the error is?

"The Stone 63..." Missing letter.

wil473
Slax
Looking at BRs, MagPul PDR and PDR-C seem to be identical. Well, other than the range.

- I can knock a point off Draw?

Sure. Maybe adjust the price a bit too.

Report message to a moderator

Sergeant Major
Re: Alrulco Folding Stock Discussion & Bug Reports - (2011/08/06 - 20--/--/--)[message #315823] Fri, 01 March 2013 20:48 Go to previous messageGo to next message
Wil473

 
Messages:2815
Registered:September 2004
Location: Canada
Moved deKnegt's post to where it belongs: UC-1.13 Discussions and Bug Reporting (2011/07/30 to 2011/--/--)

Fixed - "The Stone 63..."

Changed - MagPul PDR-C, Draw decreased by 1. Keeping price the same as PDR for now.


EDIT: Using SCI_Unstable_Revision_5882_on_GameDir_1610, I could not replicate the CTD with either AR Rate Reducer or Improved Bolt. Using the same gun as in the graphic I was able to attach each attachment to separate guns.

As I suspected, the issue with Bobby Ray's delivering only 1 AR Upper Receiver is due to the dummy calibers not having any real magazines. Aside from asking a coder to determine why BR doesn't like guns without magazines for this mod (and lets be honest play style is a factor too... I've only intended for Uppers to be available in small numbers but people keep using "exploitative" game settings), there are a few other options all of them bad:

1) Stop using dummy calibers in uppers
- leads to an exploit where magazines can be produced by separating the AR

2) Make uppers Misc items
- no weapons stats show up in BR's

3) Create Magazines in the dummy calibers
- the exploit now produces a pile of useless magazine items

4) Do nothing
- players will only be able to buy uppers one at a time

[Updated on: Fri, 01 March 2013 22:09] by Moderator

Report message to a moderator

Lieutenant

Re: Alrulco Folding Stock Discussion & Bug Reports - (2011/08/06 - 20--/--/--)[message #315833] Fri, 01 March 2013 23:10 Go to previous messageGo to next message
Wil473

 
Messages:2815
Registered:September 2004
Location: Canada
Good news, I think I've found a workaround, and it can be applied to the lower receivers too so they don't show up with magazines going forward.

5) Dummy magazines of 0 round capacity. The game seems to regard these as valid magazines meaning they Bobby Ray deliveries show up with default attachments and in numbers greater than 1 per order, but as 0 size capacity guns and magazines they do not seem to appear in-game, so no piles of useless dummy magazines.

Report message to a moderator

Lieutenant

Re: Alrulco Folding Stock Discussion & Bug Reports - (2011/08/06 - 20--/--/--)[message #315837] Sat, 02 March 2013 02:08 Go to previous messageGo to next message
wolf00 is currently offline wolf00

 
Messages:1148
Registered:September 2006
Location: Czech Republic

5872 on 1608 exe 5878

http://img268.imageshack.us/img268/5918/screenshot2013030200491.jpg

http://img9.imageshack.us/img9/173/screenshot2013030200500.jpg


i cant hire any mercenary from aim or create any imp ...

downgrade to sci 5869/1606 help a lot,now mod starting normaly ...

[Updated on: Sat, 02 March 2013 02:28] by Moderator

Report message to a moderator

Sergeant Major
Re: Alrulco Folding Stock Discussion & Bug Reports - (2011/08/06 - 20--/--/--)[message #315840] Sat, 02 March 2013 02:30 Go to previous messageGo to next message
Wil473

 
Messages:2815
Registered:September 2004
Location: Canada
According to DepressivesBrot's Savegame and compatibility Notice Here as of Rev. 5872 XML changes will break savegame/mod compatibility. ie. v4.00 is not going to work without some modification as I found a last night. I even put up a warning on this page...

The next morning, CapnJack had posted the fix:

CapnJack
Running on 5882 just fine. Requires you to add SquadNames.xml to TableData and move Pockets.xml and PocketPopups.xml from TableData\Inventory to TableData\Items for both Data-AFS and Data-1.13 folders.


v4.10 will reflect the new folder structure only so it will be save game breaking. Probably for the best as there are some adjustments to ammotypes.

[Updated on: Sat, 02 March 2013 02:31] by Moderator

Report message to a moderator

Lieutenant

Re: Alrulco Folding Stock Discussion & Bug Reports - (2011/08/06 - 20--/--/--)[message #315843] Sat, 02 March 2013 05:20 Go to previous messageGo to next message
CapnJack is currently offline CapnJack

 
Messages:56
Registered:June 2012
I've encountered a bug while playing AFS 4 on SVN 5882 that causes an entire sector inventory to disappear except for one item that is grayed out. It's probably a 1.13 bug since I've had sector inventories disappear before I've just never caught it till much later when it's too late. I have a savegame for it, all you have to do to make the items disappear from H14 is load the currently selected sector (Alma H14) to tactical view and all items in the sector will vanish. Should I put up a thread in the bug reports section with the savegame?

Here is the savegame.

[Updated on: Sat, 02 March 2013 05:24] by Moderator

Report message to a moderator

Corporal
Re: Alrulco Folding Stock Discussion & Bug Reports - (2011/08/06 - 20--/--/--)[message #315850] Sat, 02 March 2013 13:34 Go to previous messageGo to next message
Panzerdraco is currently offline Panzerdraco
Messages:4
Registered:January 2013
... how exactly am I supposed to merge an AR-15 upper with a lower? I bought the Ares Shrike upper and the A3 lower from BR, but I can't seem to find a way to put them together.

Report message to a moderator

Civilian
Re: Alrulco Folding Stock Discussion & Bug Reports - (2011/08/06 - 20--/--/--)[message #315851] Sat, 02 March 2013 13:44 Go to previous messageGo to next message
Wil473

 
Messages:2815
Registered:September 2004
Location: Canada
CapnJack
I've encountered a bug while playing AFS 4 on SVN 5882 that causes an entire sector inventory to disappear except for one item that is grayed out. It's probably a 1.13 bug since I've had sector inventories disappear before I've just never caught it till much later when it's too late. I have a savegame for it, all you have to do to make the items disappear from H14 is load the currently selected sector (Alma H14) to tactical view and all items in the sector will vanish. Should I put up a thread in the bug reports section with the savegame?

Here is the savegame.


Yes please, if sector item is going missing again it is most likely a general bug.


The ARES Shrike was missing a merger, and separation item transformation. Fixed for v4.10.

Report message to a moderator

Lieutenant

Re: Alrulco Folding Stock Discussion & Bug Reports - (2011/08/06 - 20--/--/--)[message #315853] Sat, 02 March 2013 13:50 Go to previous messageGo to next message
Slax is currently offline Slax

 
Messages:1411
Registered:July 2006
Location: People riding polar bears...
A thought regarding the 4 default attachment slots and AR-15s.
How about splitting the four into two sets? Upper and lower. Two modifications for each. This way, if you dismantle your weapon, you could mix and match quicker and easier once everything's been tinkered with. This, of course only being applicable if you plan on adding any such specific upgrades in the future.

Report message to a moderator

Sergeant Major
Re: Alrulco Folding Stock Discussion & Bug Reports - (2011/08/06 - 20--/--/--)[message #315854] Sat, 02 March 2013 13:55 Go to previous messageGo to next message
Wil473

 
Messages:2815
Registered:September 2004
Location: Canada
An annoying quirk of the transformation mechanism is that attachments that don't fit the 1st produced item (which seems to retain the stats of the original item) are ejected instead of checking for an appropriate home on the 2nd produced item. AR uppers produced by separating an existing, and loaded up, AR gun will lack any attachments. Indeed the game seems to be producing a clean sheet version of the 2nd item, which is why I'm using dummy calibers, to prevent the spawning of free ammo which the game likes to produce whenever a gun is created.

EDIT: I decided to change the Improved Bolt to only fit direct impingement AR's (not piston ones) and their uppers. Fully expecting it to be dumped into inventory, I separated a M4 and found that the Improved Bolt ended up stuck on the Upper. Oddly, did the same thing to the ARES Shrike with I just added the item transform yesterday and all the attachments were dumped from the Upper.

If all goes well, AFS v4.10 will be out tomorrow and I begin work on DL-1.13 v4.10 / and back-fitting all the fixes into UC-1.13 v4.10.

[Updated on: Sun, 03 March 2013 03:15] by Moderator

Report message to a moderator

Lieutenant

Re: Alrulco Folding Stock Discussion & Bug Reports - (2011/08/06 - 20--/--/--)[message #315874] Sun, 03 March 2013 14:53 Go to previous messageGo to next message
mr_clark is currently offline mr_clark

 
Messages:47
Registered:December 2011
Location: Potsdam, Germany
wil473

EDIT: I decided to change the Improved Bolt to only fit direct impingement AR's (not piston ones) and their uppers.


Just as a question: Are GasPiston AR-15s also, inherently, more reliable then the DirectGasImpingment models (in the mod)? Then this change would make a lot of sense!


Another thing, I don't know if it's really a bug you could do anything about, but well:

I am still at Preview-2, and I wanted to equip my sniper with a .338 LM weapon finally. I've "looted" a couple of rifles and found an annoying bug: If you use the "Scope Rings" adapter and a variable magnificartion scope, the attachment "breaks" on changing magnifications. That is you can change the magnification an then the "new" variable power scope occupies the same attachment slot as the adapter making any more changes impossible, as one can only select the adapter rings and not the scope. Unattaching the scope rings 'gives back' the scope, making it usable again... I've "tested" it on the DSR-1 and the DesertTactical.

I don't know how hard it would be, but maybe it would be better/easier if those larger scopes are inherently usable by all those LongRangeSniper systems, even though they are equipped with P-rails?
EDIT: Maybe like you do with the AK-12s? (I really like how they are implemented, btw)

(BTW: The SVU-A I had found early in the game is incredible by the way: fast, realtively accurate, high damage...)

[Updated on: Sun, 03 March 2013 16:50] by Moderator

Report message to a moderator

Corporal
Re: Alrulco Folding Stock Discussion & Bug Reports - (2011/08/06 - 20--/--/--)[message #315875] Sun, 03 March 2013 17:38 Go to previous messageGo to next message
Wil473

 
Messages:2815
Registered:September 2004
Location: Canada
Yes, piston AR's are generally more reliable in-game than direct gas impingement AR's.

Alrulco Folding Stock v4.10 20130303 (Full) Now Available

Whatever was wrong with mediafire seems to have fixed itself. That said, I hope to have the ModDB link up soon.

Report message to a moderator

Lieutenant

Re: Alrulco Folding Stock Discussion & Bug Reports - (2011/08/06 - 20--/--/--)[message #315876] Sun, 03 March 2013 19:34 Go to previous messageGo to next message
Slax is currently offline Slax

 
Messages:1411
Registered:July 2006
Location: People riding polar bears...
Integrated heavy bipod (M82A1 used as example) has the wrong image. Looks like a CAWS mag.

The Metal Storm shotgun, attached, kept swallowing my loaded ammo the other day. Didn't really test it but I think it happened after loading my game. 5862 exe, 4.00.

Vinnie's got the wrong ammo for his M29 kit.

[Updated on: Mon, 04 March 2013 17:08] by Moderator

Report message to a moderator

Sergeant Major
Re: Alrulco Folding Stock Discussion & Bug Reports - (2011/08/06 - 20--/--/--)[message #315922] Mon, 04 March 2013 19:21 Go to previous messageGo to next message
Wil473

 
Messages:2815
Registered:September 2004
Location: Canada
Slax
Integrated heavy bipod (M82A1 used as example) has the wrong image. Looks like a CAWS mag.

I still need to find a graphic for the heavy bipod, for now I can switch it back to the ordinary bipod graphic.

Slax
The Metal Storm shotgun, attached, kept swallowing my loaded ammo the other day. Didn't really test it but I think it happened after loading my game. 5862 exe, 4.00.

Attached guns still have some issues that hopefully Flugente will revisit someday. I've still got to get around to posting in the correct threads things like this as well as some XML Editor issues I've run into.

Slax
Vinnie's got the wrong ammo for his M29 kit.
I'll take a look at that this afternoon.

Report message to a moderator

Lieutenant

Re: Alrulco Folding Stock Discussion & Bug Reports - (2011/08/06 - 20--/--/--)[message #315924] Mon, 04 March 2013 19:40 Go to previous messageGo to next message
CapnJack is currently offline CapnJack

 
Messages:56
Registered:June 2012
The BAR has auto fire mode only yet it is a select fire weapon and should have semi-auto capability.

EDIT: Also, .22 WMR Match Ammo in at least the 10 round magazines gives no range or accuracy bonus, basically the same as ball ammo.

[Updated on: Tue, 05 March 2013 12:14] by Moderator

Report message to a moderator

Corporal
Re: Alrulco Folding Stock Discussion & Bug Reports - (2011/08/06 - 20--/--/--)[message #315931] Mon, 04 March 2013 21:19 Go to previous messageGo to next message
Sam Hotte

 
Messages:1966
Registered:March 2009
Location: Middle of Germany
wil473
Slax
Integrated heavy bipod (M82A1 used as example) has the wrong image. Looks like a CAWS mag.

I still need to find a graphic for the heavy bipod, for now I can switch it back to the ordinary bipod graphic.

AIMNAS has one; perhaps this may fit?

Report message to a moderator

Sergeant Major
Re: Alrulco Folding Stock Discussion & Bug Reports - (2011/08/06 - 20--/--/--)[message #315934] Mon, 04 March 2013 21:29 Go to previous messageGo to next message
Slax is currently offline Slax

 
Messages:1411
Registered:July 2006
Location: People riding polar bears...
Here we go. I introduce to you...

SAM - Small Aiming Modification
Modified APBPConstants.ini and CTHConstants.ini which make your weapons, both old and new, feel minty fresh!
No XML modification required. No need to start a new game. Be sure to make backups in case you change your mind.

Download - Here

Report message to a moderator

Sergeant Major
Re: Alrulco Folding Stock Discussion & Bug Reports - (2011/08/06 - 20--/--/--)[message #315938] Mon, 04 March 2013 22:56 Go to previous messageGo to next message
mr_clark is currently offline mr_clark

 
Messages:47
Registered:December 2011
Location: Potsdam, Germany
wil473

I still need to find a graphic for the heavy bipod, for now I can switch it back to the ordinary bipod graphic.

I personally prefer the current 'placeholder' over the same graphic. Otherwise, Sam_Hotte has a valid point here.

Report message to a moderator

Corporal
Re: Alrulco Folding Stock Discussion & Bug Reports - (2011/08/06 - 20--/--/--)[message #315952] Tue, 05 March 2013 11:12 Go to previous messageGo to next message
wolf00 is currently offline wolf00

 
Messages:1148
Registered:September 2006
Location: Czech Republic


http://img51.imageshack.us/img51/889/screenshot2013030509425.jpg

i have order on four isar .22 but i get only one ... latest afs instaled my quicksave is on mediafire link

http://www.mediafire.com/?8fddgnj19az332o

[Updated on: Tue, 05 March 2013 11:14] by Moderator

Report message to a moderator

Sergeant Major
Re: Alrulco Folding Stock Discussion & Bug Reports - (2011/08/06 - 20--/--/--)[message #315954] Tue, 05 March 2013 13:38 Go to previous messageGo to next message
Wil473

 
Messages:2815
Registered:September 2004
Location: Canada
Wolf, you better upload the INI, I cannot load the game with the stock AFS INI.

Also can you specify if by latest AFS you mean v4.10 that was released a few days ago - I took particular care to test the new dummy ammo magazine fix for this issue.

Report message to a moderator

Lieutenant

Re: Alrulco Folding Stock Discussion & Bug Reports - (2011/08/06 - 20--/--/--)[message #315958] Tue, 05 March 2013 14:48 Go to previous messageGo to next message
wolf00 is currently offline wolf00

 
Messages:1148
Registered:September 2006
Location: Czech Republic

http://www.mediafire.com/?yzqf2kunzi0jmea sci 1610 exe 5882 ... dirt system off,owerheating off,advanced repair system off ...

Report message to a moderator

Sergeant Major
Re: Alrulco Folding Stock Discussion & Bug Reports - (2011/08/06 - 20--/--/--)[message #315959] Tue, 05 March 2013 14:58 Go to previous messageGo to next message
Wil473

 
Messages:2815
Registered:September 2004
Location: Canada
Found it, there was a mistake in the fake .22LR Upper magazine needed to trick the game into thinking the uppers and lowers have a valid magazine. Looks like only the .22LR Uppers are affected.

Looking at your save game Wolf, you can afford better guns than .22LR - so no rush to have this fixed. I've already got a backlog of stuff that needs to be approved by ModDB.

EDIT: looks like when I tried to update v4.00 to v4.10 on ModDB I botched it - hence why it still hasn't been approved yet, but DL-1.13 v4.20 was approved in a few hours. Might as well do a quick AFS v4.30 for upload later today.

[Updated on: Tue, 05 March 2013 19:44] by Moderator

Report message to a moderator

Lieutenant

Re: Alrulco Folding Stock Discussion & Bug Reports - (2011/08/06 - 20--/--/--)[message #315977] Tue, 05 March 2013 21:57 Go to previous messageGo to next message
Wil473

 
Messages:2815
Registered:September 2004
Location: Canada
A little earlier than I planned, but since I needed to replace the ModDB upload, here is:

Alrulco Folding Stock v4.30 20130305


Now back to cleaning up the base mod for Urban Chaos-1.13.

Report message to a moderator

Lieutenant

Re: Alrulco Folding Stock Discussion & Bug Reports - (2011/08/06 - 20--/--/--)[message #315984] Tue, 05 March 2013 22:52 Go to previous messageGo to next message
wolf00 is currently offline wolf00

 
Messages:1148
Registered:September 2006
Location: Czech Republic

super now upers work's excelently... diemaco asult rifles are compatible witch this upers ?[isar kac etc ...] thx

Report message to a moderator

Sergeant Major
Re: Alrulco Folding Stock Discussion & Bug Reports - (2011/08/06 - 20--/--/--)[message #315994] Wed, 06 March 2013 04:25 Go to previous messageGo to next message
Vince7403 is currently offline Vince7403

 
Messages:145
Registered:February 2012
CapnJack: BAR's issued before the Garand rifle was adopted were select-fire, the ones afterwards were automatic-only.

Looking forward to playing the new version soon!

Report message to a moderator

Sergeant
Re: Alrulco Folding Stock Discussion & Bug Reports - (2011/08/06 - 20--/--/--)[message #316000] Wed, 06 March 2013 11:14 Go to previous messageGo to next message
mr_clark is currently offline mr_clark

 
Messages:47
Registered:December 2011
Location: Potsdam, Germany
wolf00
super now upers work's excelently... diemaco asult rifles are compatible witch this upers ?[isar kac etc ...] thx

The Diemaco's "give" the same lowers as all the other AR-15s so no problem.

Report message to a moderator

Corporal
Re: Alrulco Folding Stock Discussion & Bug Reports - (2011/08/06 - 20--/--/--)[message #316015] Wed, 06 March 2013 19:21 Go to previous messageGo to next message
ElWrobel is currently offline ElWrobel

 
Messages:41
Registered:December 2011
I'm not sure if this was brought up,but I think you can't attach the stock/holster to the Stechkin APS. Or is it done differently than for the VP70?

Report message to a moderator

Corporal
Re: Alrulco Folding Stock Discussion & Bug Reports - (2011/08/06 - 20--/--/--)[message #316016] Wed, 06 March 2013 19:49 Go to previous messageGo to next message
Wil473

 
Messages:2815
Registered:September 2004
Location: Canada
El_Wrobel
I'm not sure if this was brought up,but I think you can't attach the stock/holster to the Stechkin APS. Or is it done differently than for the VP70?


The Stechkin APS Stock/Holster was missing the NAS Attachment Class tag meaning the game didn't know what NAS slot to produce on the Stechkin.

Additionally, this leads to a bit of a feature request for the XML Editor, we need the "Attachment Data" tab to appear for LBE items (not specifically for this, thought it would have been useful, but for the modular LBE feature that was added recently which also has LBE attaching to other LBE to add pockets).

[Updated on: Wed, 06 March 2013 19:51] by Moderator

Report message to a moderator

Lieutenant

Re: Alrulco Folding Stock Discussion & Bug Reports - (2011/08/06 - 20--/--/--)[message #316073] Fri, 08 March 2013 16:40 Go to previous messageGo to next message
Slax is currently offline Slax

 
Messages:1411
Registered:July 2006
Location: People riding polar bears...
Ceramic plates have a goofy BR description.

And then there's this oddity.
DBM53obhhf0[/video]

[Updated on: Fri, 08 March 2013 18:06] by Moderator

Report message to a moderator

Sergeant Major
Re: Alrulco Folding Stock Discussion & Bug Reports - (2011/08/06 - 20--/--/--)[message #316076] Fri, 08 March 2013 19:12 Go to previous messageGo to previous message
Wil473

 
Messages:2815
Registered:September 2004
Location: Canada
That's a known issue with attached guns. I think I've found some additional bugs with the overall attached gun system:
- ammunition fired by the attachment gun does not seem to reflect the correct ammotype (ie. exploding ammo won't explode correctly)
- I cannot seem to hit anything from attached shotguns, however attached rifles seem to do better, leading to the workaround of having the rifle attached to the shotgun primary weapon.


Fixed:

Robinson Arms XCR Pistol (6.8mm SPC) - incorrect magazine size

Ceramic Plate - incorrect BR description

Report message to a moderator

Lieutenant

Previous Topic: UC-1.13 Discussions and Bug Reporting (2011/07/30 to 2013/03/07)
Next Topic: what am i supposed to be doing?
Goto Forum:
  


Current Time: Thu Mar 28 09:58:23 GMT+2 2024

Total time taken to generate the page: 0.03255 seconds