Home » PLAYER'S HQ 1.13 » JA2 Complete Mods & Sequels » AIMNAS Archives » AIMNAS WF2012 Part 11
Re: AIMNAS WF2012 Part 11[message #329462] Thu, 02 January 2014 06:59 Go to previous messageGo to next message
Dyson

 
Messages:204
Registered:December 2008
unrepairable items:
  • Ghillie Kit
  • Ghillie Set
  • Ceramic Plates
  • Armor which is combined with Camo Uniform

weird: in A6 all mercs deny to prone while not looking to the northwest or southeast

Spotter feature seems not working

40mm Buckshot and Flechette are sometimes very heavy in mercs inventory. Two of them weight araound 20kg until you click them and replace them.

[Updated on: Thu, 02 January 2014 07:07] by Moderator

Re: AIMNAS WF2012 Part 11[message #329464] Thu, 02 January 2014 07:28 Go to previous messageGo to next message
Parkan

 
Messages:451
Registered:April 2010
Location: Russia,Sevastopol

Dyson
unrepairable items:
  • Ghillie Kit
  • Ghillie Set
  • Ceramic Plates
  • Armor which is combined with Camo Uniform

weird: in A6 all mercs deny to prone while not looking to the northwest or southeast




1.Unrepairable items-is a feature of this mod.Repair your stuff with compaund 18
2.smeagol already mentioned about this bug.(about a6)
Re: AIMNAS WF2012 Part 11[message #329465] Thu, 02 January 2014 12:11 Go to previous messageGo to next message
wolf00

 
Messages:1165
Registered:September 2006
Location: Czech Republic

you must remove camo uniform from armor,use c-18 on armor,i thnik only camo uniform cant be repair
Re: AIMNAS WF2012 Part 11[message #329469] Thu, 02 January 2014 12:57 Go to previous messageGo to next message
Dyson

 
Messages:204
Registered:December 2008
wolf00
you must remove camo uniform from armor,use c-18 on armor,i thnik only camo uniform cant be repair



Just wanted to report, what I saw.
For ceramic plates, unrepairability seems to be a feature. They are just heavily damaged after holding a projektile.
If one can repair a 80% destroyed titan plate with C-18, shouldn't one be able to repair the ceramic plates with C-20?
I am not sure which would fit best the idea of it.
Personally, I think, some more items should be unique or evanescent.

An idea: ceramic plates, all the polymeric fibre stuff and maybe some more items should become inrepairable if they got too much damage (50%?, 70%?)

But what about the Ghillie Stuff? Normally, it is made by oneself from relativly easy gettable stuff. It should be easy to repair it. Just pin some green and brown coloured old rag over the bulletholes Very Happy
Re: AIMNAS WF2012 Part 11[message #329470] Thu, 02 January 2014 13:26 Go to previous messageGo to next message
smeagol

 
Messages:2741
Registered:June 2008
Location: Bremen, Germany
Dyson

Just wanted to report, what I saw.
For ceramic plates, unrepairability seems to be a feature. They are just heavily damaged after holding a projektile.
If one can repair a 80% destroyed titan plate with C-18, shouldn't one be able to repair the ceramic plates with C-20?
I am not sure which would fit best the idea of it.
Personally, I think, some more items should be unique or evanescent.

An idea: ceramic plates, all the polymeric fibre stuff and maybe some more items should become inrepairable if they got too much damage (50%?, 70%?)

But what about the Ghillie Stuff? Normally, it is made by oneself from relativly easy gettable stuff. It should be easy to repair it. Just pin some green and brown coloured old rag over the bulletholes Very Happy


Yes, I agree, Ghillie should be repairable. I'll fix that.

As for ceramic plates and titanium plates, you'd have to use compound on them to repair them, as already mentioned. Same with camo uniforms (I'm just way too lazy to add those combine merges for all camo uniforms + compound... they add up to something like 300 merges).

Yeah, fixed it and added the merges... wasn't as bad, as I thought.


And the A6 bug happens in other sectors with cliffs as well, I suspect it to be a very old bug, that Rowa had fixed like at least 2 years ago, but somehow it sneaked back in.

About the 40mm ammo, this has been reported earlier before, as well. No idea how to fix it. It might be related to the ammo type, the size or the magazine size (or something completely different...).

Keep on reporting, I'll probably upload the updated files this weekend.

[Updated on: Thu, 02 January 2014 14:41] by Moderator



Re: AIMNAS WF2012 Part 11[message #329482] Fri, 03 January 2014 01:31 Go to previous messageGo to next message
Dyson

 
Messages:204
Registered:December 2008
Sector B5: Drugfarm
Is the crowd intended to be there?
http://abload.de/thumb/2014-01-0300_04_41-jar5bs7.png
Re: AIMNAS WF2012 Part 11[message #329485] Fri, 03 January 2014 03:42 Go to previous messageGo to next message
Dyson

 
Messages:204
Registered:December 2008
Compact Binoculars, Quality Binoculars and Nightspy don't fit in the large slots like like the Blackhawk backpoack has.

Belt feeding seems not working.
Re: AIMNAS WF2012 Part 11[message #329487] Fri, 03 January 2014 04:42 Go to previous messageGo to next message
Dyson

 
Messages:204
Registered:December 2008
In turnbased mode, some combinations of weapons and backpacks (i guess) cause the items in the backpack to drop while extending collapsed stocks.

Something happens in the border sectors. I got several time the issue, that after entering e.g. C16, I can't load saved games. "ERROR loading the game". While loading an older savegame is possible, saving after this problem appears, produces corrupt savegames.

[Updated on: Fri, 03 January 2014 04:56] by Moderator

Re: AIMNAS WF2012 Part 11[message #329488] Fri, 03 January 2014 08:08 Go to previous messageGo to next message
Eso1

 
Messages:20
Registered:January 2012

Not sure if this is has been reported yet, but when i created a new game and hired lucky i had collapsed the stock of his FNC and then tried to pull it back out but when i tried to it said no actions available
Re: AIMNAS WF2012 Part 11[message #329492] Fri, 03 January 2014 13:36 Go to previous messageGo to next message
theBrain

 
Messages:22
Registered:June 2012
I just started to fight my way through Drassen and found a bug in B14: The fence between the 2 houses to the left of the restaurant, right above the green car cannot be cut with the wirecutters as it is no obstacle at all, my men could walk right through it.
Re: AIMNAS WF2012 Part 11[message #329497] Fri, 03 January 2014 16:58 Go to previous messageGo to next message
lockie

 
Messages:3890
Registered:February 2006
Location: Scotland
Probably more of a glitch than a bug , try it again just for kicks ?


Re: AIMNAS WF2012 Part 11[message #329501] Fri, 03 January 2014 17:49 Go to previous messageGo to next message
smeagol

 
Messages:2741
Registered:June 2008
Location: Bremen, Germany
Dyson

Sector B5: Drugfarm
Is the crowd intended to be there?


Nope, will have to investigate this.

Dyson

Compact Binoculars, Quality Binoculars and Nightspy don't fit in the large slots like like the Blackhawk backpoack has.

Belt feeding seems not working.


Belt feeding isn't supported yet.

Will fix the binoculars issue.

Fixed.

Dyson
In turnbased mode, some combinations of weapons and backpacks (i guess) cause the items in the backpack to drop while extending collapsed stocks.

Something happens in the border sectors. I got several time the issue, that after entering e.g. C16, I can't load saved games. "ERROR loading the game". While loading an older savegame is possible, saving after this problem appears, produces corrupt savegames.


The backpacks issue is probably because the items don't fit the backpack slot (same as the binoculars probably). Can you specify which items cause this?

The issue with the border sectors is new, never happened yet to me. Don't know what's causing it. Is it only happening in C16 or other sectors as well? It might be, that it could be somehow related to Skyrider placement, not sure about that, though.



Eso1

Not sure if this is has been reported yet, but when i created a new game and hired lucky i had collapsed the stock of his FNC and then tried to pull it back out but when i tried to it said no actions available


Fixed. Thanks for reporting.

[Updated on: Fri, 03 January 2014 18:02] by Moderator



Re: AIMNAS WF2012 Part 11[message #329502] Fri, 03 January 2014 18:11 Go to previous messageGo to next message
smeagol

 
Messages:2741
Registered:June 2008
Location: Bremen, Germany
theBrain
I just started to fight my way through Drassen and found a bug in B14: The fence between the 2 houses to the left of the restaurant, right above the green car cannot be cut with the wirecutters as it is no obstacle at all, my men could walk right through it.


Thanks for spotting this. The wirefence structure was missing the jsd file. I corrected this.


Re: AIMNAS WF2012 Part 11[message #329514] Fri, 03 January 2014 20:33 Go to previous messageGo to next message
Dyson

 
Messages:204
Registered:December 2008
smeagol
Fixed.

Top Job!

smeagol

The backpacks issue is probably because the items don't fit the backpack slot (same as the binoculars probably). Can you specify which items cause this?

The issue with the border sectors is new, never happened yet to me. Don't know what's causing it. Is it only happening in C16 or other sectors as well? It might be, that it could be somehow related to Skyrider placement, not sure about that, though.


Ok, first the savegame problem:
It is actually my second installation of the XMAS release since christmas.
I've encountered that problem now again. Everytime, I was around the sector D16 but had visited it before. All I can say is that I was in the sector or after defeating the enemies there a second time and then left again. So, after or while this seems to be the point where something goes wrong.

I can load an autosavegame some hours before but if I immidiatly save then. The problem is there. I played several hours before it happens first and saved in between. but I have to go some days back to find a savegame, that works.
But I have also played in the XML editor, duplicating one weapon and removing the heavy weapons flag.



Second the backpack:
It happens only in turnbased mode. The 2 big pockets of the blackhawk are full. Tried it with AAC Honey Badger and SR-2 Veresk.


Re: AIMNAS WF2012 Part 11[message #329517] Fri, 03 January 2014 20:44 Go to previous messageGo to next message
Flugente

 
Messages:3461
Registered:April 2009
Location: Germany
A similar error recently happened due to my fault - exes between r6705 and r6708 are bad. If you use one of those, switch to something >= r6709.

And, in that case, set CAMPAIGN_HISTORY_MAX_REPORTS to something low but positive, like 10.


Re: AIMNAS WF2012 Part 11[message #329518] Fri, 03 January 2014 21:32 Go to previous messageGo to next message
smeagol

 
Messages:2741
Registered:June 2008
Location: Bremen, Germany
Dyson

Second the backpack:
It happens only in turnbased mode. The 2 big pockets of the blackhawk are full. Tried it with AAC Honey Badger and SR-2 Veresk.




Yeah, that's weird. I just checked the xml pocket data, nothing unusual going on there. They should all fit the pocket, guess it's something with transformation code (and to quote Reuban "me no code fix it guy").


Re: AIMNAS WF2012 Part 11[message #329551] Sat, 04 January 2014 16:44 Go to previous messageGo to next message
Dyson

 
Messages:204
Registered:December 2008
Flugente
A similar error recently happened due to my fault - exes between r6705 and r6708 are bad. If you use one of those, switch to something >= r6709.

And, in that case, set CAMPAIGN_HISTORY_MAX_REPORTS to something low but positive, like 10.


Did both. Error did not occur again.
Re: AIMNAS WF2012 Part 11[message #329555] Sat, 04 January 2014 18:10 Go to previous messageGo to next message
Dyson

 
Messages:204
Registered:December 2008
smeagol
Yeah, that's weird. I just checked the xml pocket data, nothing unusual going on there. They should all fit the pocket, guess it's something with transformation code (and to quote Reuban "me no code fix it guy").


Does not happen, if backpack zipper is open.
Re: AIMNAS WF2012 Part 11[message #329569] Sun, 05 January 2014 03:13 Go to previous messageGo to next message
Dyson

 
Messages:204
Registered:December 2008
Beretta Cx4 Storm is a SMG, should be a rifle

When trying to attach Rod & Spring and the action fails, the game session brakes

[Updated on: Sun, 05 January 2014 03:15] by Moderator

Re: AIMNAS WF2012 Part 11[message #329570] Sun, 05 January 2014 03:36 Go to previous messageGo to next message
Maalstroom

 
Messages:344
Registered:December 2008
Location: en route to San Hermanos
adjusting 10x scope magnification results in dropping everything from the backpack and renders it unusable in turn based combat, i usually carry ammunition.
some flashlights don't work at all, and you can't have more than 3 switched on in the same time.
firing the mini-gun takes your breath away in one turn, grizzly or steroid can fire only once and then fall down, since the magazine is around 2000 bullets, this beauty should be fed from the backpack directly.
there's no rifle sling slot and rifle sling, don't know if this 1.13 standard or not.
Re: AIMNAS WF2012 Part 11[message #329571] Sun, 05 January 2014 11:09 Go to previous messageGo to next message
DepressivesBrot

 
Messages:3803
Registered:July 2009
Maalstroom
firing the mini-gun takes your breath away in one turn, grizzly or steroid can fire only once and then fall down, since the magazine is around 2000 bullets, this beauty should be fed from the backpack directly.
That's clearly working as intended. The M134 is a special treat for our beeping little metal buddy.


Re: AIMNAS WF2012 Part 11[message #329573] Sun, 05 January 2014 14:31 Go to previous messageGo to next message
smeagol

 
Messages:2741
Registered:June 2008
Location: Bremen, Germany
Maalstroom

some flashlights don't work at all, and you can't have more than 3 switched on in the same time.


In the editor they seem to be all correct. Sure you have the right amount of batteries?


Re: AIMNAS WF2012 Part 11[message #329574] Sun, 05 January 2014 16:50 Go to previous messageGo to next message
Dyson

 
Messages:204
Registered:December 2008
Maalstroom

firing the mini-gun takes your breath away in one turn, grizzly or steroid can fire only once and then fall down, since the magazine is around 2000 bullets, this beauty should be fed from the backpack directly.


Smeagol wrote before, that the minigun is intended to be only for the robot. That's why you can't really use it with a merc. Compare AIMNAS FAQ thread:
AIMNAS FAQ Weapons List

[Updated on: Sun, 05 January 2014 17:11] by Moderator

Re: AIMNAS WF2012 Part 11[message #329575] Sun, 05 January 2014 16:52 Go to previous messageGo to next message
Maalstroom

 
Messages:344
Registered:December 2008
Location: en route to San Hermanos
For example using the maxa beam - when you turn it on the batteries drop on the ground.
Re: AIMNAS WF2012 Part 11[message #329578] Sun, 05 January 2014 18:20 Go to previous messageGo to next message
smeagol

 
Messages:2741
Registered:June 2008
Location: Bremen, Germany
Ah, yes... that might be due to faulty default attachment setting. I think I have already fixed that in the update version I intend to upload by the end of next week.


Re: AIMNAS WF2012 Part 11[message #329579] Sun, 05 January 2014 19:18 Go to previous messageGo to next message
Dyson

 
Messages:204
Registered:December 2008
Some of the Sniper Rifles don't fit into the Sniper Bag. A KSVK may be too big for it but a DSR-1, too?

[Updated on: Mon, 06 January 2014 02:00] by Moderator

Re: AIMNAS WF2012 Part 11[message #329582] Mon, 06 January 2014 03:55 Go to previous messageGo to next message
Dyson

 
Messages:204
Registered:December 2008
Spelling:
  • Devastator
Conversions:
  • Despite the M4 Seal Recon Rifle, no C.K. works on M4A1/M4MWS and M16A2/M16A2E1/M16A4/M16A4MWS (not only the ones with the note "Not implemented yet.")
  • M4A1 Upper Receiver does not work with any M4 variant
  • There is no M16 Upper Receiver to convert back to M16 variant
  • No interchangability on M16/M4 models (e.g. M4 to M4A3 to Colt PDW or Beowulf 12" to Beowulf 20")
  • Akdal MKA 1919 has no RAS variant
Bobby Ray's:
  • 9x39mm not on sale
  • General Dynamics LWMMG not on sale
Strategic mode:
  • Mercs have facility events while not working and also when they are in transit (...lost some health...)

Re: AIMNAS WF2012 Part 11[message #329584] Mon, 06 January 2014 07:47 Go to previous messageGo to next message
MrFlibble

 
Messages:16
Registered:November 2011
What's up everyone ? Been away for almost two years now... I dreamed a couple of nights ago I was searching on Google for the word AIMNAS ! so I woke up with Jagged Alliance in mind decided to give it another run ; took me quite a bunch of attempts to recall my Bear's Pit account password but I'm here now and glad to see there's a fresh new AIMNAS around. So again, what do I need, beside a JA2 Gold clean install, to get it back working ? Thanks for your comprehension ; 2 years off left me kinda outdated... Cheers !
Re: AIMNAS WF2012 Part 11[message #329585] Mon, 06 January 2014 08:38 Go to previous messageGo to next message
theBrain

 
Messages:22
Registered:June 2012
There is a SCI by Depri, that's the only thing you need in addition to the clean install to get the latest build running.
Re: AIMNAS WF2012 Part 11[message #329586] Mon, 06 January 2014 08:51 Go to previous messageGo to next message
smeagol

 
Messages:2741
Registered:June 2008
Location: Bremen, Germany
theBrain
There is a SCI by Depri, that's the only thing you need in addition to the clean install to get the latest build running.


Current SCI is a year old, though.


The recent version is only available as a non-SCI package atm (Depri will make a new SCI once I manage to upload an updated version that fixes a lot of the reported issues since christmas).


Re: AIMNAS WF2012 Part 11[message #329588] Mon, 06 January 2014 09:22 Go to previous messageGo to next message
smeagol

 
Messages:2741
Registered:June 2008
Location: Bremen, Germany
Dyson
Spelling:
  • Devastator


That thing is actually called Devastator by the company that builds it.


Dyson
Conversions:

  • Despite the M4 Seal Recon Rifle, no C.K. works on M4A1/M4MWS and M16A2/M16A2E1/M16A4/M16A4MWS (not only the ones with the note "Not implemented yet.")
  • M4A1 Upper Receiver does not work with any M4 variant
  • There is no M16 Upper Receiver to convert back to M16 variant
  • No interchangability on M16/M4 models (e.g. M4 to M4A3 to Colt PDW or Beowulf 12" to Beowulf 20")
  • Akdal MKA 1919 has no RAS variant


I probably was way too lazy to add the receiver kit merges. I might fix this, not sure yet... probably will make them unbuyable in the meanwhile.

Dyson

Bobby Ray's:
  • 9x39mm not on sale
  • General Dynamics LWMMG not on sale


I'll look into it.
9x39 should show up on BR already. At least it is set to be available from there (in low quantities, but it should be buyable).

The LWMMG was not on sale on purpose, as I intendend to add it to a map as a special weapon, but for testing reasons I'll make it temporarily available from BR.


Dyson
Mercs have facility events while not working and also when they are in transit (...lost some health...)


Losing health while in transit due to an ambient effect of a facility sounds like a bug. Losing it while in a sector can happen and is easily treated by a doctor.

[Updated on: Mon, 06 January 2014 09:32] by Moderator



Re: AIMNAS WF2012 Part 11[message #329592] Mon, 06 January 2014 16:20 Go to previous messageGo to next message
Dyson

 
Messages:204
Registered:December 2008
It's "Devestator" in the game
Re: AIMNAS WF2012 Part 11[message #329598] Mon, 06 January 2014 19:32 Go to previous messageGo to next message
MrFlibble

 
Messages:16
Registered:November 2011
smeagol
theBrain
There is a SCI by Depri, that's the only thing you need in addition to the clean install to get the latest build running.


Current SCI is a year old, though.


The recent version is only available as a non-SCI package atm (Depri will make a new SCI once I manage to upload an updated version that fixes a lot of the reported issues since christmas).

Downloaded the archive you linked here and latest EXE (the 6722 for instance) found on Depri's SkyDrive... would that be all I need over a clean JA2 install ?

[Updated on: Mon, 06 January 2014 20:09] by Moderator

Re: AIMNAS WF2012 Part 11[message #329601] Mon, 06 January 2014 21:24 Go to previous messageGo to next message
Maalstroom

 
Messages:344
Registered:December 2008
Location: en route to San Hermanos
yeap! that would be all, i had some problems with my old game directory substructure, but a clean install + aimnas + latest build worked like a charm.

Thanks smeagol and dupri!
Re: AIMNAS WF2012 Part 11[message #329634] Wed, 08 January 2014 04:35 Go to previous messageGo to next message
Vince7403

 
Messages:146
Registered:February 2012
Minor thing, but the Devastator is rebuilt from a Remington 1100 semi-automatic, not an 870.
Re: AIMNAS WF2012 Part 11[message #329641] Wed, 08 January 2014 17:38 Go to previous messageGo to next message
CurburtWurf
Messages:1
Registered:December 2012
Grats on the release. Downloading right now, will let you know if I find anything that hasn't been posted yet.
Re: AIMNAS WF2012 Part 11[message #329642] Wed, 08 January 2014 19:00 Go to previous messageGo to next message
smeagol

 
Messages:2741
Registered:June 2008
Location: Bremen, Germany
Vince7403
Minor thing, but the Devastator is rebuilt from a Remington 1100 semi-automatic, not an 870.


Hmm... as we don't have a 1100 and the 870 is quite a common gun in the mod, I stick with it (even if not 100% accurate). But thanks for pointing it out.

@Vince I don't know btw, if I managed to get in all the typo fixes you pm'ed me some time ago. I might have been too lazy to actually do so. :/


Re: AIMNAS WF2012 Part 11[message #329649] Wed, 08 January 2014 22:01 Go to previous messageGo to next message
Vince7403

 
Messages:146
Registered:February 2012
That's fine, I appreciate that you're busy with other things, and it's all right that item descriptions are lower priority than other features.
Re: AIMNAS WF2012 Part 11[message #329651] Wed, 08 January 2014 23:11 Go to previous messageGo to next message
Dyson

 
Messages:204
Registered:December 2008
Agree, it is just to keep your list of to dos filled, that you should ever have something to do, wether you feel bored Smile
Re: AIMNAS WF2012 Part 11[message #329713] Sat, 11 January 2014 22:14 Go to previous messageGo to previous message
Dyson

 
Messages:204
Registered:December 2008
smeagol
Dyson

Bobby Ray's:
  • 9x39mm not on sale
  • General Dynamics LWMMG not on sale


I'll look into it.
9x39 should show up on BR already. At least it is set to be available from there (in low quantities, but it should be buyable).


My mistake.
I meant the 9x39 Mag-Adapter. It is only available via Tony. That's no bug.
Previous Topic: AIMNAS Item requests
Next Topic: AIMNAS Bug reports
Goto Forum:
  


Current Time: Sun Oct 20 22:10:51 EEST 2019

Total time taken to generate the page: 0.05124 seconds