Home » PLAYER'S HQ 1.13 » JA2 Complete Mods & Sequels » All about modding JA2 » Fight For Freedom update (FFF gets an update and dedicated English version)
Fight For Freedom update[message #359581] Thu, 16 April 2020 09:52 Go to next message
Hawkeye is currently offline Hawkeye

 
Messages:2412
Registered:October 2005
Location: Australia
The previously underground single player release mod by the Scorpion FFF - Fight For Freedom has now been revised and updated for those wanting to play a WWII mod in Arulco.

FFF is based on an older 1.13 build, but uses it's own exe and features some unique features and runs quite differently from the JA2 we are accustomed to.

https://www.mediafire.com/convkey/ee6b/ydpgmh9qxpn9q15zg.jpg


https://www.mediafire.com/convkey/33e3/x9qe3fcvz5xi46izg.jpg

https://www.mediafire.com/convkey/0a25/i89q3acqerj3d0uzg.jpg

Being based in the 40's, technology is very different and players will note armour is quite rudimentary compared to modern standards. This results in combat being quicker and more deadlier.

Previously FFF was focused as a multiplayer game in German. This is no longer the case. This is a single player campaign with unique maps, opponents, NPC's and RPC's speaking in English.

To play, all you need to do is grab a fresh vanilla JA2 installation (1.12) and then download the FFF SCI here;

http://www.mediafire.com/file/fa2ezbud16cacjy/FFF-1.13.exe/file

or alternatively it is now available at the Pit's Kermi mirror here;

https://storage.rcs-rds.ro/links/6fd6c939-da5a-450c-8d7e-b31597cee676

and overwrite your JA2 install.

Be aware this an early beta mod and still work in progress, but quite playable. Some limits are noticeable as FFF doesn't support NIV, NAS nor NCTH. A number of NPC's have no speech files and bugs are bound to appear, there is also some German language still present in the game from it's older build. This project needs support with testing and could be developed further if the interest is there.

https://www.mediafire.com/convkey/76fb/r8kumqbgd188v7wzg.jpg

Take a look around, some of the UI has changed and you now work for the O.S.S. which uses data differently to AIM or MERC and due to some of the visual changes attempting to reflect its period era some buttons have changed. Namely the X button to close windows, you can either use the Esc button or click on the turn page graphic.

[Updated on: Sun, 21 March 2021 08:40]

Report message to a moderator

Lieutenant

Re: Fight For Freedom update[message #359592 is a reply to message #359581] Thu, 16 April 2020 21:34 Go to previous messageGo to next message
crackwise is currently offline crackwise

 
Messages:113
Registered:April 2013
Wow, very interesting, thanks a lot! I will for sure take a look at it! happy

Report message to a moderator

Sergeant
Re: Fight For Freedom update[message #359603 is a reply to message #359581] Fri, 17 April 2020 09:01 Go to previous messageGo to next message
Realist

 
Messages:28
Registered:September 2005
Location: Duesseldorf, Germany
Oy, good stuff

Report message to a moderator

Private 1st Class
Re: Fight For Freedom update[message #359620 is a reply to message #359581] Sat, 18 April 2020 07:17 Go to previous messageGo to next message
MrKamikazi is currently offline MrKamikazi

 
Messages:8
Registered:November 2017
Sounds great! Just checking but you mean a fresh JA2 1.12 install right? Or should I install some form of 1.13 first?

I'll add some more questions via an edit.

Is there any way to bypass the new game video? It's been ages since I have played without the ini.editor front end and I'm not seeing a file that I can edit to skip it. Currently the game starts but the video loops and using either a mouse click or escape leaves the video frozen on screen while the game starts in the background.

That was using the JA2_5472_npcfix.DE. Using JA2_5465.npc-attachments-fix leads to a black screen and a loop of intro music.

[Updated on: Sat, 18 April 2020 08:43]

Report message to a moderator

Private
Re: Fight For Freedom update[message #359621 is a reply to message #359620] Sat, 18 April 2020 09:36 Go to previous messageGo to next message
MrKamikazi is currently offline MrKamikazi

 
Messages:8
Registered:November 2017
Now I have it working with the 5465 file but I'm going to have to re-learn how to make JA2 work well with modern systems. I have the slow bullets and lagging controls that I've seen (and solved) before.

Report message to a moderator

Private
Re: Fight For Freedom update[message #359622 is a reply to message #359621] Sat, 18 April 2020 10:35 Go to previous messageGo to next message
Hawkeye is currently offline Hawkeye

 
Messages:2412
Registered:October 2005
Location: Australia
Yes, clean Vanilla install = 1.12. No need to add 1.13 files as they come with the SCI all built in.

I don't know about the intro, possibly disable it in the ini, if it's there.

This mod seems to run a lot faster on my machine compared to 1.13, but you are probably running on a newer system than me.

Report message to a moderator

Lieutenant

Re: Fight For Freedom update[message #359624 is a reply to message #359622] Sat, 18 April 2020 11:03 Go to previous messageGo to next message
MrKamikazi is currently offline MrKamikazi

 
Messages:8
Registered:November 2017
It's not clear I'm running a newer system than you; Surface Pro 3 from 2014. Its giving the same symptoms I had last time I reinstalled JA2 (a year and a half ago I think). Annoying but I know I've solved it before.

I did play long enough to see that many of the mercs got changed. It looks like the IMPs are going to be worse than even the starting mercs now.

Report message to a moderator

Private
Re: Fight For Freedom update[message #359625 is a reply to message #359624] Sat, 18 April 2020 15:22 Go to previous messageGo to next message
Deleted.

 
Messages:2663
Registered:December 2012
Location: Russian Federation
Since it probably uses Win 10 or Win 8, you need to apply registry patch or DLL fix for the game to work correctly.
To disable intro, set PLAY_INTRO = 0 in Ja2.ini, you don't need INI Editor for that, just use notepad.



Left this community.

Report message to a moderator

Lieutenant

Re: Fight For Freedom update[message #359636 is a reply to message #359625] Sun, 19 April 2020 04:22 Go to previous messageGo to next message
MrKamikazi is currently offline MrKamikazi

 
Messages:8
Registered:November 2017
Running nicely now except that it crashes with a run time error in the first sector when talking to Carla.

Also, Buns has some ammo with an image of NADA in her initial inventory. I haven't tried hiring her to see what happens with it. Some of the other mercs have odd loadouts but that is the only one that seems broken.

[Updated on: Sun, 19 April 2020 04:31]

Report message to a moderator

Private
Re: Fight For Freedom update[message #359756 is a reply to message #359636] Sat, 25 April 2020 19:30 Go to previous messageGo to next message
az75 is currently offline az75

 
Messages:177
Registered:June 2012
Location: Romania
I have everything slowed down, probably performance issues.
Game runs au relanti, I'm just floating, floating, foating with the animated grass.
I shoot and a good 20 seconds pass before bullet hits.
WTF?

Report message to a moderator

Staff Sergeant
Re: Fight For Freedom update[message #359786 is a reply to message #359756] Mon, 27 April 2020 10:08 Go to previous messageGo to next message
Hawkeye is currently offline Hawkeye

 
Messages:2412
Registered:October 2005
Location: Australia
What are you running it on? If Windows 10 or even Windows 8, follow Seven's suggestions above or any other optimization tips elsewhere on the boards.

Report message to a moderator

Lieutenant

Re: Fight For Freedom update[message #359829 is a reply to message #359786] Wed, 29 April 2020 12:33 Go to previous messageGo to next message
az75 is currently offline az75

 
Messages:177
Registered:June 2012
Location: Romania
I run it on Win 10, on a laptop that prefers 1366x768 resolution (cannot set that). I had already applied the dlls and performance fix, before asking. It still doesn't want to move...
1st of april release of 1.13 runs fine, but this...it sucks bigtime.

[Updated on: Wed, 29 April 2020 12:35]

Report message to a moderator

Staff Sergeant
Re: Fight For Freedom update[message #359847 is a reply to message #359829] Thu, 30 April 2020 04:18 Go to previous messageGo to next message
Hawkeye is currently offline Hawkeye

 
Messages:2412
Registered:October 2005
Location: Australia
Strange, I always notice FFF runs like it's on an energy booster on my PC, but I'm not on Windows 10.

Report message to a moderator

Lieutenant

Re: Fight For Freedom update[message #359848 is a reply to message #359847] Thu, 30 April 2020 04:26 Go to previous messageGo to next message
Deleted.

 
Messages:2663
Registered:December 2012
Location: Russian Federation
This may be because of highspeed timer issues. You can try to set HIGHSPEED_TIMER = FALSE in ja2.ini
Unfortunately, timer fixes from The_Bob appeared only in 8xxx revisions.



Left this community.

Report message to a moderator

Lieutenant

Re: Fight For Freedom update[message #359868 is a reply to message #359848] Fri, 01 May 2020 05:16 Go to previous messageGo to next message
Hawkeye is currently offline Hawkeye

 
Messages:2412
Registered:October 2005
Location: Australia
I don't think there's even that option with FFF, but it is running on an old 1.13 as a base. The game is not running fast forward like you can on some 1.13 with enemy turns running fast, rather on my system everything appears to run super responsively, every click the response is immediate, perhaps newer versions of 1.13 have the slightest lag, but only noticeable compared to FFF. I know that won't make Az feel any better mind you.

Report message to a moderator

Lieutenant

Re: Fight For Freedom update[message #359891 is a reply to message #359868] Sat, 02 May 2020 10:38 Go to previous messageGo to next message
Hawkeye is currently offline Hawkeye

 
Messages:2412
Registered:October 2005
Location: Australia
Message from the Scorpion today;

Performance issues with FFF: what I always do when running new ja2 exe's on my win 10 is to run them as Administrator and in compatibility mode to win xp sp2. also limited Colours (16 bit i think) but that may be because i play windowed mode. But These options solved the massive lag issue i had with 'Arulco vacations' for instance.

Report message to a moderator

Lieutenant

Re: Fight For Freedom update[message #360047 is a reply to message #359891] Sat, 16 May 2020 02:35 Go to previous messageGo to next message
Kitty

 
Messages:436
Registered:October 2017
Location: Germany
When opening the sector-inventory after a battle, the game freezes sometimes. In the cases where I managed to close the inevntory, parts of the graphics for it where still shown.

I haven't come very far yet, but it's rather challenging. The lack of decent protective gear is causing me to look for cover constantly happy

I'm allready impressed by the floating grass and spreading fire. Gonna watch out for other eye candies, a look at the tilesets allready gave me glimpse on what may can be seen.

Is there any plan to adapt this to 7609? Or isn't this possible because the exe used is changed too much to justify the effort? 7609 should have less bugs coming with it.
My guess is, the sector-inventory freezes I faced would be such a case.

Performance is just fine for me, pretty much like you, it rather feels smoother and fast responding. But I'm running it on a win7, to be fair.

In general, it's fun to play and I'm happy you revived FFF.



How to get: latest 1.13, 7609 and more | 7609 SCI (eng) | Compiling+SVN

I need more details. (Didi Hallervorden)

Report message to a moderator

Master Sergeant
Re: Fight For Freedom update[message #360051 is a reply to message #360047] Sat, 16 May 2020 05:16 Go to previous messageGo to next message
Hawkeye is currently offline Hawkeye

 
Messages:2412
Registered:October 2005
Location: Australia
I do like the different era flavour which we've tried to push further in tone in this build and there's plenty of unique additions that keep the interest up, that's for exmaple why I tried to pass off the laptop as an analog desk and filing system, but some features are often a compromise.

As far as I can tell with discussions with The Scorpion it's highly unlikely it will get a 7609 or newer build update, at least from Scorpion himself, but you never know. He is rather enjoying a new lease of life with the Deidranna Side Mod but he usually passes on blessings those interested in improving or sharing his teams work.

FFF single player had a bit of a troubled development and sat around in a half-played state for years, so it was picked up, revised and translated to get it back out there. It was a hope that if this English single player version of FFF garnered more interest then there may be more of an inclination to develop it further. One obstacle is FFF's unique features and code limits how it can be updated and this may require help or guidance from the original team that worked on it.

Report message to a moderator

Lieutenant

Re: Fight For Freedom update[message #362677 is a reply to message #360051] Wed, 17 March 2021 13:28 Go to previous messageGo to next message
luk3Z is currently offline luk3Z

 
Messages:68
Registered:December 2006
Location: Metavira
I can't run this mod:

https://s9538.chomikuj.pl/ChomikImage.aspx?e=EJaIxrhtIosWd3nYzcStV6CSfw-8UUyA2W9JB15N1ibBFLE4egdETSz2-Ji5zZzF7qVVeMNSD-P43j33Ff7ugrSYj1LXQa23fDrxHSCFSZE&pv=2
https://s9538.chomikuj.pl/ChomikImage.aspx?e=EJaIxrhtIosWd3nYzcStV6CSfw-8UUyA2W9JB15N1ibBFLE4egdETSz2-Ji5zZzF7qVVeMNSD-P 43j33Ff7ugrSYj1LXQa23fDrxHSCFSZE&pv=2

JA2_5472 & ja2_5465 also don't work (instant crash without any error).
FFF-1.13.exe extracted over JA2 1.12 vanilla gog version.
ja2.exe - Entry point not found
The procedure entry point _AIL_set_3D_sample_distances@12 could not be located in the dynamic link library mss32.dll.

Running in XP SP2/SP3 comaptibility and running as admin does not help even on 16 bit color depth.

EDIT:
I'm trying to use mss32.dll from Vengeance Reloaded (but still without success):

Using JA2.exe (No of tilesets in code does not match data file):
https://s9498.chomikuj.pl/ChomikImage.aspx?e=P6iB0Ws1A1hPDUMirBIstk9tiRUgdCWvufvsvfPASQv1sXpJOszmSmcJeNZKQwqNR-yk3nF33YXsMRps4JpqrTXpWEaowMZxOovdghPYjdw&pv=2
https://s9498.chomikuj.pl/ChomikImage.aspx?e=P6iB0Ws1A1hPDUMirBIstk9tiRUgdCWvufvsvfPASQv1sXpJOszmSmcJeNZKQwqNR-yk3nF33YX sMRps4JpqrTXpWEaowMZxOovdghPYjdw&pv=2

Using exe: ja2_5465 & JA2_5472 (sgp.cpp line 778):
https://s9484.chomikuj.pl/ChomikImage.aspx?e=9OihK4b745fPqHyeWE-_1LM3RvKp8vnql5v6K6GPwSOefgJPgLNRt8hFB4zpY8OzITUzBPp63Kfj2h7jbL_Qt1oT1_7q7Fsx5bsdVbMHS0c&pv=2
https://s9484.chomikuj.pl/ChomikImage.aspx?e=9OihK4b745fPqHyeWE-_1LM3RvKp8vnql5v6K6GPwSOefgJPgLNRt8hFB4zpY8OzITUzBPp63Kf j2h7jbL_Qt1oT1_7q7Fsx5bsdVbMHS0c&pv=2

[Updated on: Tue, 23 March 2021 21:31]




JA2 Vault (Repositories): https://pastebin.com/MJFckiaq
JA2 v1.13 - Starter Documentation: https://github.com/aimnas/1.13_starter_documentation
JA2 1.13 Hot Keys: https://pastebin.com/EHLMuk1k

Report message to a moderator

Corporal
Re: Fight For Freedom update[message #362736 is a reply to message #362677] Tue, 23 March 2021 13:37 Go to previous messageGo to next message
Hawkeye is currently offline Hawkeye

 
Messages:2412
Registered:October 2005
Location: Australia
Not sure why those image links aren't working.

I passed it by Scorpion and he said;

'Mss32.dll related error messages used to mean we were using the wrong .Exe back in the day.
Not sure what it means nowadays, haven't seen that in ages.

I never used a gog version of the game. So no clue if that's relevant.
I would suggest to reinstall and try again.'

Report message to a moderator

Lieutenant

Re: Fight For Freedom update[message #362737 is a reply to message #362736] Tue, 23 March 2021 21:42 Go to previous messageGo to next message
luk3Z is currently offline luk3Z

 
Messages:68
Registered:December 2006
Location: Metavira
1. game_log.log
 *** Tue Mar 23 20:37:14 2021 *** 
[ OE8LQ-WNAP6-62LIY-X5XGI-FJG50 ]

[0.509961] : ERROR : File     :  sgp.cpp
Line     :  778
Location :  InitializeStandardGamingPlatform
  Initializing Virtual File System failed



2. stack_trace.log :
 *** Tue Mar 23 20:37:14 2021 *** 
[ OE8LQ-WNAP6-62LIY-X5XGI-FJG50 ]

[0.506738] : Backtrace: [vfs_config.ini] - Error when opening file : 2

[0.509319] : Backtrace: no profiles specified



3. vfs.log
 *** Tue Mar 23 20:37:25 2021 *** 
[ OE8LQ-WNAP6-62LIY-X5XGI-FJG50 ]

[0.343102] : [vfs_config.ini] - Error when opening file : 2
[0.345673] : Processing VFS configuration
[0.345701] : no profiles specified


This is very strange - there is no vfs_config.ini file anywhere.
I have only: vfs_config.fff.ini, vfs_config.JA2Vanilla.ini and vfs_config.JA2113.ini.

EDIT:
I renamed vfs_config.fff.ini to vfs_config.ini and it seems it's working (with ja2_5465_npc+attachment-fix - Hex_2.exe & JA2_5472_npcfix_DE.exe only) big grin

[Updated on: Tue, 23 March 2021 21:47]




JA2 Vault (Repositories): https://pastebin.com/MJFckiaq
JA2 v1.13 - Starter Documentation: https://github.com/aimnas/1.13_starter_documentation
JA2 1.13 Hot Keys: https://pastebin.com/EHLMuk1k

Report message to a moderator

Corporal
Re: Fight For Freedom update[message #362762 is a reply to message #362737] Fri, 26 March 2021 11:24 Go to previous messageGo to next message
Hawkeye is currently offline Hawkeye

 
Messages:2412
Registered:October 2005
Location: Australia
That reads as if part if the install is missing. So it appears likely that the game might not be fully functional just with that tweak.

Report message to a moderator

Lieutenant

Re: Fight For Freedom update[message #362764 is a reply to message #362762] Fri, 26 March 2021 18:23 Go to previous messageGo to next message
Kitty

 
Messages:436
Registered:October 2017
Location: Germany
I had windows complaining about unknown exe (why isn't it a zip?). I ignored the warning, extracted the files. Put the extracted files over original JA2 (tried JA2 english from Steam and JA2 german from CD) and both exe are working for me.

For the sake of testing, I redownloaded it again today. Did the same as above. Still working for me. Got it running on Win10 and Win7.

No problems with Intro or vfs on my side.

The GUI is tricky, took me a while to adjust, otherwise it's fun. Haven't finished it yet, it's a tough nut to crack (got my landing squad wiped out several times, lol).

Maybe something went wrong with your download? Dunno.

[Updated on: Fri, 26 March 2021 18:29]




How to get: latest 1.13, 7609 and more | 7609 SCI (eng) | Compiling+SVN

I need more details. (Didi Hallervorden)

Report message to a moderator

Master Sergeant
Re: Fight For Freedom update[message #364864 is a reply to message #362764] Sun, 04 September 2022 18:10 Go to previous messageGo to next message
luk3Z is currently offline luk3Z

 
Messages:68
Registered:December 2006
Location: Metavira
Did somebody play that mod in multiplayer mode ?

[Updated on: Sun, 04 September 2022 18:11]




JA2 Vault (Repositories): https://pastebin.com/MJFckiaq
JA2 v1.13 - Starter Documentation: https://github.com/aimnas/1.13_starter_documentation
JA2 1.13 Hot Keys: https://pastebin.com/EHLMuk1k

Report message to a moderator

Corporal
Re: Fight For Freedom update[message #364867 is a reply to message #364864] Tue, 06 September 2022 08:40 Go to previous messageGo to next message
Hawkeye is currently offline Hawkeye

 
Messages:2412
Registered:October 2005
Location: Australia
Hey Luk3Z, I don't think the mulitplayer system works for this version of the mod, however the original release of FFF was designed with multiplayer in mind, so if you can find that version that might be the one to use.

Report message to a moderator

Lieutenant

Re: Fight For Freedom update[message #365347 is a reply to message #364867] Sun, 21 May 2023 12:57 Go to previous messageGo to next message
Aztec is currently offline Aztec

 
Messages:11
Registered:April 2023
Location: Slovenia
Hi

I would really like to play this mod but after installation I have a problem with both exe files


with ja2_5465_npc+attachment-fix - Hex_2.exe

I can hear only initial sound but my screen is black. I can not do anything

with JA2_5472_npcfix_DE.exe

After initial video my screen goes black too
And I this mod all in German?

Any help?

Report message to a moderator

Private
Re: Fight For Freedom update[message #365348 is a reply to message #365347] Mon, 22 May 2023 04:03 Go to previous messageGo to next message
Kitty

 
Messages:436
Registered:October 2017
Location: Germany
Aztec wrote on Sun, 21 May 2023 12:57
Hi

I would really like to play this mod but after installation I have a problem with both exe files


with ja2_5465_npc+attachment-fix - Hex_2.exe

I can hear only initial sound but my screen is black. I can not do anything

with JA2_5472_npcfix_DE.exe

After initial video my screen goes black too
And I this mod all in German?

Any help?

--

When starting new game, FFF-1.13 will try to play two Intro-files

The second one can cause a blackscreen

Both of those video-files use rather old formats: .smk and .bik

And while .bik might be supported by newer OS-Systems, it's rather unlikely for .smk

The first video-file used is in .bik-format and that one usually plays

The second one is in .smk and often causes blackscreen

Solutions:

Toggle Possible Solutions
--
Tested this with version of FFF-1.13 I downloaded at Bear'sPit Forum in March 21, if it ever gets updated this solution may becomes obsolete


Also:

The interface is a little tricky. sometimes you have to fumble around a little to find the exact spot to close a window, etc)
Sometimes it's hard to see, like the "shut down" at the cigarettes (to get to overview)

It did run on Win10 with both, english JA2 version from Steam and german JA2 version from CD

The original FFF was a german mod, that's why the texts in Intro are german, game itself will be english

Use "ja2_5465_npc+attachment-fix - Hex_2.exe" with english JA2

and "JA2_5472_npcfix_DE.exe" with german JA2 (game UI in geman)

It's a rather challenging mod, I got wiped out quite a few times (haven't completed it yet).

[Updated on: Mon, 22 May 2023 04:19]




How to get: latest 1.13, 7609 and more | 7609 SCI (eng) | Compiling+SVN

I need more details. (Didi Hallervorden)

Report message to a moderator

Master Sergeant
Re: Fight For Freedom update[message #365349 is a reply to message #365348] Mon, 22 May 2023 12:03 Go to previous messageGo to next message
Hawkeye is currently offline Hawkeye

 
Messages:2412
Registered:October 2005
Location: Australia
Kitty wrote on Mon, 22 May 2023 11:03


The interface is a little tricky. sometimes you have to fumble around a little to find the exact spot to close a window, etc)
Sometimes it's hard to see, like the "shut down" at the cigarettes (to get to overview)

It did run on Win10 with both, english JA2 version from Steam and german JA2 version from CD

The original FFF was a german mod, that's why the texts in Intro are german, game itself will be english
If the interface is trying you can close down windows by just hitting the escape key also.

As mentioned the original FFF (multiplayer) game was German but this is considered a full English translation, however some German stubbornly remained in some parts.

Report message to a moderator

Lieutenant

Re: Fight For Freedom update[message #365350 is a reply to message #365348] Mon, 22 May 2023 22:51 Go to previous messageGo to next message
Aztec is currently offline Aztec

 
Messages:11
Registered:April 2023
Location: Slovenia
Hi Kitty

I did solution nr. 2 and now it is working using  JA2_5472_npcfix_DE.exe

But everything goes veeeery slow. I don't speak german so I don't know what to change in my game options. I can see that the grass is waving. Shoul I switch this off?

Thank you

Report message to a moderator

Private
Re: Fight For Freedom update[message #365363 is a reply to message #365350] Sun, 04 June 2023 23:33 Go to previous messageGo to next message
Aztec is currently offline Aztec

 
Messages:11
Registered:April 2023
Location: Slovenia
I used this patch for win 10 and everything goes faaast

https://thepit.ja-galaxy-forum.com/index.php?t=msg&th=22795&start=0&

Report message to a moderator

Private
Re: Fight For Freedom update[message #365660 is a reply to message #365363] Thu, 17 August 2023 11:44 Go to previous messageGo to next message
lockie is currently offline lockie

 
Messages:3721
Registered:February 2006
Location: Scotland
Started up FFF , added win10 fix , using the english exe. , all going well with install . Another fine mod from Scorp , I enjoyed the DSM mod too , great fun being the oppressors for a change !

Report message to a moderator

Captain

Re: Fight For Freedom update[message #365697 is a reply to message #365660] Fri, 25 August 2023 17:18 Go to previous message
lockie is currently offline lockie

 
Messages:3721
Registered:February 2006
Location: Scotland
A bit of a problem , items won't merge and causes freeze/esc to windows . Any ideas ?

Report message to a moderator

Captain

Previous Topic: Wolf mod!
Next Topic: Glossary of JA terms & abbreviations
Goto Forum:
  


Current Time: Fri Mar 29 06:38:13 GMT+2 2024

Total time taken to generate the page: 0.01962 seconds